WORK 1 INSTALLATON GUIDE Recommended Additional Items: Level Tape measure Stud finder Drill Pencil Wall mounting hardware
WORK 1 WARNING: Prior to mounting french cleat onto wall, check for proper mounting anchors to use.
2 Lay myWall panel face down on a clean floor. Place both top and bottom sections next to each other. Top section has the cut-outs for the french cleat mounting at the top. The bottom panel has a lower open section at the bottom. (2 wooden blocks and 8 furniture screws are provided with your myWall panel set) Attach connector blocks to fasten top and bottom of your myWall panel together.
Locate metal or wood stud locations on wall for mounting. 4 (Recommended use of a stud finder) WARNING: Check for plumbing or electrical locations within wall. Mark location for French Cleat. French cleat height from floor to base of cleat can depend on use of panels. 5 Recommended height is 83.5 inches from floor to bottom of french cleat.
8 Attach safety locking plate to left or right side of mywall panel. (Locking plate is only needed on one side of the panel) Attach end-caps to each outer edge side of your myWall panel set. 9 (2 screws are supplied for each side) (The end-caps are used to hide the view of the hanging cleat hardware) 10 Attach your accessories to the panel and ENJOY.
RENEWABLE RESOURCES The myWall system uses rubber wood, a renewable and sustainable byproduct of the latex industry. Reduce: We work with our manufacturing partners to ensure we are leaving as small a carbon footprint as possible. Re-use: Our products are durable and designed to last, cutting down the need to discard our products and purchase new ones. Recycle: Our products and components use recycleable materials. myWall is a registered trademark and patented product of Thinkterior Co. Ltd, Thailand.
