Instructions / Assembly

ManualsBrandsmywoodwall ManualsDecorative Paneling3/8 in. x 4-7/8 in. x 23-5/8 in. Martini Prefinished Wood Peel and Press Wall Panel

Maintenance of your mywoodwall

mywoodwallmywoodwall

mywoodwall

TMTM

paneling : mywoodwall

paneling should be cleaned with a dry cloth or a duster. Avoid using detergent or any

cleaners. The surface of your panels is non-toxic water based paint.

_____________

__________________________

____________________

______________

________

_______________________

____________________________________________

_______________________________________

__________________________________

_________________

Using a light pencil or chalk, draw a straight line on your

wall to help position the first mywoodwall

panels.

Install one plank above the reference line. Install the other plank below the

reference line at the halfway point of the first plank. Once each piece is

installed to the wall, it is very important to ensure proper adhesion between

the adhesive tape and the wall.

Use a soft wheeled roller to create a strong bond. The roller should be rolled

3-5 times on the surface of mywoodwall

paneling directly over each strip

of tape. Please note the location of the tape before installation.

Installation Step 2

Draw a Reference Line on the Wall

Installation Step 3

Adhere the First panels to the Wall

Installation Step

Continue Installing panels Along the

Reference Line

Installation Step

Finish your Reference Row of Panels,

while making sure you are straight

Installation Step

Finish Your Wall

Add more

panels

ove and below the reference

line as pictured above. Make sure that the ends

of the panels are in good alignment and that

there are not large gaps between them.

Continue adding panels above and below the

reference line until the length of the wall is

covered with panels.

Add

panels

continuously until the wall is

complete. Make sure the ends of the panels

are aligned and that end joints are staggered.

Cut the panels to size as needed.

Installation Step 1:

Pick Your mywood

mywoodmywood

mywoodwall

wallwall

wall

TMTM

paneling Layout (some suggestions):

WARNING: Sawing, drilling or sanding wood products generates wood dust, a substance known to the State of California to cause cancer. Use a respirator

or other safeguards to avoid inhaling wood dust. Keep out of reach of children.

mywoodwall

mywoodwallmywoodwall

mywoodwall

TMTM

Solid Wood Trim Installation Instructions

Please note that some imperfections may occur as these pieces are finished real solid wood.

mywoodwall

mywoodwallmywoodwall

mywoodwall

TMTM

Trim (not included in the purchase of panels, sold separately)

Give a professional finish to your mywoodwall

wood panels by using our Trim edge protector. Each pack contains 6, pieces of edging in 48" x 0.5" x

0.5" (120 x 13 x 13 cm) strips that can be simply, quickly and cleanly attached by Tesa

adhesive tape (or screws, glue or nails) to finish your feature wall

as easily as you installed the panels. Like mywoodwall

panels, you can simply peel and press with the purchase of Tesa

adhesive tape (sold

separately)

Trim Installation process:

1. Remove trim pieces from box

2. Test fit trim pieces for direction, placement, dimensions and color choice.

3. Measure your desired length for the trim to be fitted to your wall.

4. Carefully and safely cut the wooden trim as needed.

5. Install cut trim piece with your chosen installation method.

6. With exposed wooden edges or other imperfections use mywoodwall

touch up paint.

Suggested tools and accessories

: 1. A level, 2. Miter box with handsaw, manual or electric saw (miter, skill, table, etc), 3. Measuring tape, 4. Pencil 5.

Roller, 6. Extra Tesa

adhesive tape, 7. Personal protective equipment (ex. but not limited to gloves, glasses, clothing), 8. Tools for clean-up

The manufacturer and distributors accept no responsibility under normal conditions for failure due to incorrect and/or inappropriate installations.

Products that are not compliant or defective should not be installed. Once a panel is installed, it will be considered accepted by the owner/installer.

mywoodwall

panels are made from real solid wood. Each piece is unique in appearance, texture, color and finish. Slight panel movement is

normal and will add to the aesthetics of your unique one of a kind rustic wall finish.