Instructions / Assembly

ManualsBrandsmywoodwall ManualsDecorative Paneling1/20 in. x 1/20 in. x 47-1/2 in. Black Edges and Corners Trim Covers Panel

Congratulations

CongratulationsCongratulations

Congratulations

on your purchase!

on your purchase!on your purchase!

on your purchase!

DIY

DIYDIY

DIY

(with

(with (with

(with Peel

Peel Peel

Peel &

Press adhesive

Press adhesivePress adhesive

Press adhesive

backing

backingbacking

backing)

))

)

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONSINSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

for other languages, inspiration and other products

please visit our website:

www.mywoodwall.com

www.mywoodwall.comwww.mywoodwall.com

www.mywoodwall.com

TMTM

_____________

__________________________

___________________________________________

____________________________________________________________

_______________________________________________

__________________________________

_________________

ywoodwall

ywoodwallywoodwall

ywoodwall

TMTM

Paneling : Installation Instructions

mywoodwall

paneling has been heat treated to 130

C to ensure no wildlife remains

(Not for Flooring or Exterior Applications)

Your Box Contains: paper instructions, mywoodwall

solid wood wall panels with Tesa

adhesive tape, 8 wooden shims, 3 strips of extra Tesa

adhesive tape. Trim, more Tesa

adhesive tape and touch-up paint can be purchased separately.

Prepare Your Walls for mywoodwall

mywoodwallmywoodwall

mywoodwall

TMTM

Paneling

The Tesa

adhesive tape adheres to virtually any solid surface. The bonding to the wall is very strong and should last for many years under normal

circumstances. Please ensure that the surface is clean, dry, free from debris, and sufficiently strong to support the mywoodwall

paneling. Set aside any

baseboard or wall plates. These can be re-installed after your mywoodwall

wall is completed.

The surface should be flat to within about 10 mm per running meter (approximately 3/8" per 3 ft). Normally, even in the case that the wall is slightly

uneven, the mywoodwall

panel will still be able to adhere to the wall. It may be necessary to use shims (8 wooden shims provided) if your wall is

uneven. You may need to put longer pressure on the panels (up to a few minutes) in areas where the walls are not flat to ensure the tape sticks.

Special Considerations:

1. If the wall has been recently painted, wait approximately 3 days before applying mywoodwall

paneling to ensure the surface is completely dry.

2. mywoodwall

paneling is designed to be used for non-flooring interior applications only. The panels are not weather resistant nor structural.

3. Before installing mywoodwall

paneling, allow the panels to acclimate at room temperature and humidity for minimum of 3 days.

4. mywoodwall

paneling is not recommended to be installed in locations where the humidity is exceedingly high (over 60%) or can become wet.

5. Installation must be indoors and the temperature must be between 18-30

Celsius (65

F-85

F).

6. Do not install directly next to intense heat sources such as a fireplaces and stoves.

Other Considerations when working with mywoodwall

mywoodwallmywoodwall

mywoodwall

TMTM

paneling :

mywoodwall

paneling can usually be installed directly out of the package. Depending on your needs, mywoodwall

paneling can be cut to size

using normal woodworking tools. Make sure to fit the area first before removing the protective backing layer from the Tesa

adhesive tape. We advise

you to purchase an additional 10% more products to account for cuts and trim waste.

mywoodwall

paneling is a hand finished natural wood product, so cracks and splits can occur if the panels are not handled properly. Because this

is a natural product, the presence of knots, bark, splits, slight bending or bowing, etc, should be expected. If a particular feature is not desired, simply cut it

out before installing the panel on the wall.

Suggestions for Optimal Results BEFORE Installation (Panel Layout):

1. Mix and match different mywoodwall

paneling combinations of color and grain to suit your needs.

2. Prepare a large assortment of mywoodwall

paneling nearby to ease the selection process.

3. Position the planks so that the end joints do not line-up from row to row (stagger them).

After you have chosen the desired layout for the panels, install the mywoodwall

mywoodwallmywoodwall

mywoodwall

TMTM

paneling in the following manner

1. Remove the tape backing. Once the tape is exposed, keep it clean and dry for optimal adhesion.

2. Position one edge of the paneling at the desired location, but keep the other edge elevated until you are sure the position is correct. If both edges

of the plank adhere to the wall, it will be difficult to remove.

3. Adjust the alignment of the panel as needed by moving the other end until you are satisfied with its position.

4. Gently press both edges of the panel into the wall to ensure both edges adhere.

5. If the position is correct, then firmly press the panel into the wall. You must use a roller to ensure the tape is firmly adhered. Adhesive will be fully

adhered after 48-72 hours. Give special attention to areas where a panel needs to be pressed firmly to the wall (ie flatness issues).

Summary of content (2 pages)

PAGE 1
Congratulations on your purchase! DIY (with Peel & Press adhesive backing) backing) INSTALLATION INSTRUCTIONS for other languages, inspiration and other products please visit our website: www.mywoodwall.
PAGE 2
Suggested tools and accessories: 1. A level, 2. Miter box with handsaw, manual or electric saw (miter, skill, table, etc), 3. Measuring tape, 4. Pencil 5. Roller, 6. Extra TesaTM adhesive tape, 7. Personal protective equipment (ex. but not limited to gloves, glasses, clothing), 8. Tools for clean-up The manufacturer and distributors accept no responsibility under normal conditions for failure due to incorrect and/or inappropriate installations.