Instructions

Geng Started
Remove the unit from the box. Remove any packaging from the unit, Place the packaging inside the
box and either store or dispose of safely.
Charging the Baery
The speaker is fied with a 1500 mAh baery. It is recommended that the baery is fully charged
before first use; this will take approx. 4 hours.
Connect the micro USB end of the USB charging cable into the 5 V 1 A DC charging port on the back
of the speaker and the other end to a compable USB port. Whilst charging, the LED indicator light
will illuminate red. Once fully charged, the LED indicator light will switch off. Carefully disconnect
both ends of the USB charging cable and store it safely for future use.
Using the Drum Machine Speaker
Basic Funconality: Turn on the speaker using ‘ON/OFF POWER’; the LED lights will illuminate. Turn
the LED lights on by pressing ‘LIGHT’; press it again fo turn the LED lights off.
Adjust the volume of the speaker using the master volume control dial. Rotate it in a clockwise
direcon to increase the volume; decrease the volume by rotang it in an anclockwise direcon.
Use ‘ON/OFF POWER’ to turn the speaker off.