Instructions / Assembly

ManualsBrandsN ManualsCeiling Light PartsProLED Volumetric Panel Emergency Battery for ProLED Volumetric Panel Series

ProLED

Linear LED High Bay Gen II

Emergency Battery Installation Instructions

Input voltage 120-277VAC 50/60Hz

Input current 150mA MAX.

Power fact 0 .6

Recharge power 8 W MAX.

Standby power <0.5W

Red Lead 3 A,90V

White/black Lead 1 00W MAX.

Output current 100~1050mA

Output voltage 11~56V

Output power 25W MAX.

Output short protection YES

Output open protection YES

Ambient temperature

-20 ~50

Ambient temperature2 10°C-50°C LiFePO4

Tc MAX

Time to light 0.3S from detection of emergency event

Recharge time required 24- 48Hours (Refer to battery chart)

Battery type L iFePO4 9.6VDC

Battery capacity available 0 .9Ah~6Ah

Electrical Data

Markings

Emergency

LED Driver

EM-0825-010/105-P2

Product Features

- 1050mA output Current max

- SELV for output voltages < 60 V DC

Programmable constant current

- Open circuit protection

- Short circuit protection

- No PCB

- Sound related A

- Ul / cUL R/C, Class 2

- FCC Part 15 Class B

- 5 Years Limited Warranty

IMPORTANT SAFE PRACTICES

PLEASE READ CAREFULLY AND FOLLOW ALL INSTRUCTIONS FOR YOUR OWN SAFETY.

IMPORTANT: An un-switched AC power source of 100V AC to 277V AC is required. This device is designed for use in

xtures listed for dry and damp locations.

CAUTION: Make sure all electrical connections conform to the National Electrical Code and all applicable local

regulations.

CAUTION: Do not let power supply cords touch hot surfaces.

CAUTION: Do not mount near gas or electric heaters.

CAUTION: Battery is rechargeable LiFeP04 type and must be recycled or disposed of properly. Do not use this

emergency driver with accessory equipment other than recommended by manufacturer. Failure to follow this may

cause unsafe conditions.

Servicing should be performed by qualied service personnel.

Do not use this emergency driver for other than intended use.

Equipment should be mounted in locations and heights where it will not be readily subjected to tampering by

unauthorized personnel.

Summary of content (2 pages)

PAGE 1
ProLED® Linear LED High Bay Gen II Emergency Battery Installation Instructions Electrical Data Input voltage 120-277VAC 50/60Hz Input current 150mA MAX. Power fact 0 Recharge power 8 Standby power Red Lead 3 White/black Lead 1 Emergency LED Driver EM-0825-010/105-P2 Product Features - 1050mA output Current max - SELV for output voltages < 60 V DC Programmable constant current - Open circuit protection - Short circuit protection - No PCB - ® Markings .6 W MAX. <0.5W A,90V 00W MAX.
PAGE 2
Code ProLED® Linear LED High Bay Gen II Emergency Battery Installation Instructions EMERGENCY LED LED DRIVER DRIVER EM-0825-010/105-P2 EM-0825-010/105-P2 EMERGENCY EMERGENCY LED DRIVER EM-0825-010/105-P2 Emergency LED Driver EM-0825-010/105-P2 Wiring Diagrams WIRING DIAGRAMS WIRING DIAGRAMS WIRING DIAGRAMS (L x W x H) 5W-L 8W-L 16W-L 25W-L 5W-Q 8W-Q 16W-Q 25W-Q 9.37” x 1.10” x 1.12” 9.37” x 1.10” x 1.12” 9.37” x 1.22” x 1.20” 9.37” x 2.24” x 1.20” LiFePO4 3.62” x 2.70” x 0.98” 3.62” x 2.70” x 0.98” 4.