User's Manual

EN /
I Control elements
View Button
Player indication LED
Left joystick
USB-C charging port Bluetooth sync button
Menu Button
Right joystick
Action buttons
RB / RT
Nexus Button
D-pad
LB / LT
Battery LED
I Turning the controller on/off
To turn on the controller, simply press the Nexus button, and the controller will connect
to the last phone it was synced with.
To turn off the controller, simply hold down the Home button for 6 seconds.
Please note: the controller turns off after 15 minutes of inactivity to save battery power.
I Syncing your Android phone with the Nacon MG-X Pro controller
Go to the Bluetooth menu on your phone and start a Bluetooth device search.
Press the Nexus button on your controller, and the player indication LED should start
flashing steadily.
Press and hold the Bluetooth button on the lower right-hand side for 3 seconds to initiate
pairing. The player indicator LED should start flashing rapidly.
On your phone, you should see the controller appear under the name ‘Nacon MG-X Pro’,
select it and wait until the controller is in the list of paired devices.
I Low battery indicator
When the battery is low, the battery LED flashes red slowly.
When the battery is very low, the battery LED flashes red quickly.
I Recharging the controller
The wireless controller is equipped with an internal battery. To charge this battery, take
the USB-C cable that comes with the controller and plug it into the charging socket/port
(located below the D-pad). Then plug the other end into one of the free USB ports on your
PC. The Red LED will stop flashing. Once recharged, the LED will turn green and turn off
when the cable is unplugged.