Owner's Manual

OVERALL SPECIFICATIONS
LINE LEVEL INPUT
Input impedance (R and C) 100 kΩ+ 320 pF
Input sensitivity 158 mV (ref. 500 mV out)
Maximum input signal >9 V
Signal/Noise ratio, A-weighted >108 dB (ref. 500 mV in 500 mV out, volume set to unity gain)
>106 dB (ref. 2V out, Volume maximum)
Channel Separation >80 dB (ref. 1 kHz/10 kHz)
Frequency response ± 0.1 dB (ref. 20 Hz - 20 kHz, Tone defeat ON)
± 0.5 dB (ref. 20 Hz - 20 kHz, Tone defeat OFF)
Frequency response (subwoofer out) 100 Hz (ref. -3 dB)
OUTPUT
Output impedance - Pre out 75 Ω
Tape out Source Z + 440 Ω
Sub out 100 Ω
Headphones 10 Ω
Maximum output level - Pre out >10 V into 600 Ω
Tape out >10 V into 10 kΩ load
Sub out >7 V into 1 kΩ load
Headphones >5 V into 600 Ω
>2 V into 32 Ω
THD (CCIF IMD, DIM 100) >0.001 % (ref. 20 Hz – 20 kHz, 2V out)
TONE CONTROLS
Treble ± 5 dB at 10 kHz (ref. 2V in 500 mV out)
Bass ± 5 dB at 100 Hz (ref. 2V in 500 mV out)
POWER CONSUMPTION
Normal operation 21 W
Standby mode <0.8 W
PHONO INPUT
Input impedance - MC 40,100,600 Ω (R)
1 nF (C)
MM 47 kΩ (R)
220,300,400 pF (C)
Input sensitivity - MC 0.15 mV (ref. 1 kHz 500 mV out)
MM 2.63 mV (ref. 1 kHz 500 mV out)
Input overload - MC 1 mV/10 mV/100 mV (20 Hz/1 kHz/20 kHz)
MM 16 mV/147mV/1.4V (20 Hz/1 kHz/20 kHz)
Gain - MC in - Tape out 59.8 dB
1
(ref. 1 kHz, 10 kΩ load)
MM in - Tape out 36.5 dB (ref. 1 kHz, 10 kΩ load)
THD (CCIF IMD, DIM 100) <0.009 % (ref. 20 Hz – 20 kHz, 5 Vrms Tape out)
Signal/Noise ratio, IHF A-weighted - MC >78 dB
2
(ref. 0.5 mV)
MM >86 dB
3
(ref. 0.5 mV)
RIAA response accuracy ± 0.5 dB (ref. 20 Hz – 50 Hz)
± 0.3 dB (ref. 50 Hz – 20 kHz)
Infrasonic lter 10 Hz (at -3 dB)
5 Hz (at -14 dB)
Channel Separation - MC >60 dB (ref. 1 kHz/10 kHz)
MM >60 dB (ref. 1 kHz/10 kHz)
DIMENSION AND WEIGHT
Dimensions (W x H x D) 435 x 80 x 286 mm (Net)
435 x 99 x 315 mm (Gross
4
)
Net weight 6 kg
Shipping weight 7.8 kg
LEGEND:
1 Measured with 30 Ω generator impedance, MC input resistance set to 600 Ω.
2 Measured with 10 Ω input termination.
3 Measured with MM cartridge connected (600mH+ 600 Ω)
4 Gross dimensions include feet, volume control and extended rear panel terminals.
Specications are subject to change without prior notice. For updated documentation and features, please log onto www.NADelectronics.com for the latest
information about C 165BEE.
REFERENCE
SPECIFICATIONS
13
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ