Owner's Manual
OVERALL SPECIFICATIONS
FIXED IN, SPEAKER OUT
Continuous output power into 8 Ω and 4 Ω (both channels driven) >150 W (ref. rated THD, 20 Hz – 20 kHz)
Continuous output power into 8 Ω (Mono, Bridge mode) >330 W (ref. 20 Hz - 20 kHz, <0.02% THD)
Rated THD (250 mW to rated power, CCIF IMD, DIM 100) <0.008 % (ref. 20 Hz - 20 kHz)
Clipping power (4 Ω and 8 Ω) >170 W (ref. 1 kHz 1% THD)
IHF dynamic power - 8 Ω 250 W
4 Ω 410 W
2 Ω 600 W
IHF dynamic power (Bridge mode) - 8 Ω 800 W
4 Ω 1200 W
Peak output current >50 A (ref. 1 Ω, 1 ms)
Signal/Noise ratio >102 dB (A-weighted, ref. 1 W)
>123 dB (A-weighted, ref. 150 W)
Damping factor >180 (ref. 8 Ω, 50 Hz and 1 kHz)
Frequency response ± 0.1 dB (ref. 20 Hz - 20 kHz)
3 Hz - 100 kHz (ref. -3 dB)
Input impedance (Fixed IN) 10 kΩ + 200 pF
Input impedance (Variable IN) 100 kΩ + 100 pF
Input sensitivity 1.2 V (ref. rated power)
Voltage gain 29 dB
Minimum input level for AUTO TRIGGER 10 mV at 1 kHz
Time to power OFF at no signal in AUTO mode <10 minutes
POWER CONSUMPTION
Normal operation 312 W (ref. 230V AC 50 Hz; 120V AC 60 Hz)
Standby power <1 W
Idle power <100 W
DIMENSION AND WEIGHT
Dimensions (W x H x D) 435 x 133 x 352 mm (Net)
435 x 150 x 396 mm (Gross*)
Net weight 14.6 kg
Shipping weight 16.9 kg
* - Gross dimensions include feet, front panel button and extended speaker terminals.
Specications are subject to change without notice. For updated documentation and features, please log onto www.NADelectronics.com for the latest
information about the C 275BEE.
REFERENCE
SPECIFICATIONS
11
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ