1/9/2004 1:01 PM ® Page 1 T 514 PORTUGUÊS SVENSKA Owner’s Manual ITALIANO ESPAÑOL DVD / CD / MP3 Player ENGLISH T514_eng.
T514_eng.qxd 11/9/2004 1:01 PM Page 2 Introduction SAFETY PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE ENGLISH CAUTION THIS DVD PLAYER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS OWNER’S MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION.
T514_eng.qxd 11/9/2004 1:01 PM Page 3 Introduction FRANÇAIS DEUTSCH ITALIANO ESPAÑOL NEDERLANDS REFERENCE Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Table of Languages and Their Abbreviations . . . . . . . . . . . . . . .27 Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
T514_eng.qxd 11/9/2004 1:01 PM Page 4 Introduction BEFORE USE PLAYABLE DISCS DVD video discs (8 cm / 12 cm disc) ENGLISH Video CD (VCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) FRANÇAIS In addition, this unit can play a DVD-R, DVD±RW, Kodak PICTURE CD, SVCD, and CD-R or CD-RW that contains audio titles, MP3, WMA or JPEG files.
T514_eng.qxd 11/9/2004 1:01 PM Page 5 Introduction PRECAUTIONS FOR HANDLING THE UNIT WHEN SHIPPING THE UNIT The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. ABOUT SYMBOLS ABOUT THE SYMBOL DISPLAY “ ” may appear on the TV screen during operation. This icon means the function explained in this owner’s manual is not available on that specific DVD video disc.
T514_eng.qxd 11/9/2004 1:01 PM Page 6 Introduction REAR PANEL ENGLISH COAXIAL (Digital audio out jack) Connect to digital (coaxial) audio equipment. AUDIO OUT (Left/Right) Connect to an amplifier, receiver, or stereo system. FRANÇAIS VIDEO OUT Connect to a TV with video inputs. 12V TRIGGER IN By connecting this DVD player to another NAD audio component or system controller equipped with a 12V trigger output, you can remotely operate the T514 power ON/OFF.
11/9/2004 1:01 PM Page 7 Introduction FRONT PANEL AND DISPLAY WINDOW PAUSE Pause playback temporarily or press repeatedly for frame-by-frame playback. STOP Stops playback. PLAY Starts Playback of media. ENGLISH OPEN/CLOSE Opens or closes the disc tray. PAUSE STOP FRANÇAIS PLAY Display window Shows the current status of the player OPEN/CLOSE SVCD DVD NAD CHP MP3 A CD TRK B ALL SCAN Press for fast reverse or forward search. Disc Tray Insert playable media here.
T514_eng.
T514_eng.qxd 11/9/2004 1:01 PM Page 9 Preparation CONNECTING TO A TV • Make one of the following connections, depending on the capabilities of your existing equipment. NOTES • Set the Progressive to “On” on the setup menu for progressive signal, see page 13. • Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack). Rear of TV NEDERLANDS VIDEO CONNECTION 1 Connect the VIDEO OUT jack on the DVD Player to the video in jack on the TV using the video cable (V).
T514_eng.qxd 11/9/2004 1:01 PM Page 10 Preparation CONNECTIONS ENGLISH CONNECTING TO OPTIONAL EQUIPMENT Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll / Pro Logic Connect the Left and Right AUDIO OUT connectors on the DVD Player to the audio left and right in connectors on your amplifier, receiver, or stereo system, using the audio cables (A).
T514_eng.qxd 11/9/2004 1:02 PM Page 11 Preparation BEFORE OPERATION TEMPORARY FEEDBACK FIELD ICONS Repeat Title Repeat Chapter ENGLISH GENERAL EXPLANATION This manual gives basic instructions for operating the DVD Player. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD Player or is not available on the disc.
T514_eng.qxd 11/9/2004 1:02 PM Page 12 Preparation BEFORE OPERATION VCD 2.0 VCD 1.1 Function (Press Items Track Number ENGLISH Time 1/3 1/12 to select desired item) Shows the current track number, total number of tracks and PBC On mode, and skip to the desired track number. Shows the elapsed playing time (Display only) FRANÇAIS Audio Channel 0:20:09 Shows the audio channel, and changes the audio channel. Sound 1 ENG D 5.1 CH Shows the current sound mode, and changes the setting.
T514_eng.qxd 11/9/2004 1:02 PM Page 13 Preparation 16 : 9 TV Aspect LANGUAGE DISC LANGUAGE DVD-V Select a language for the disc’s Menu, Audio, and Subtitle. Original: The original language set for the disc is selected. Other: To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 27. If you enter the wrong language code, press CLEAR.
T514_eng.qxd 11/9/2004 1:02 PM Page 14 Preparation BEFORE OPERATION ENGLISH FRANÇAIS AUDIO DIGITAL AUDIO OUTPUT Each DVD disc has a variety of audio output options. Set the player’s Digital Audio Output according to the type of audio system you use. DOLBY DIGITAL Bitstream/PCM: Select “DOLBY DIGITAL/PCM” if you connected the DVD Player’s DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder).
T514_eng.qxd 11/9/2004 1:02 PM Page 15 Preparation OTHERS The DRC, PBC and Auto Play settings can be changed. • Press to select the desired item and press ENTER. The setting of the selected item is changed between On and Off. OTHERS PBC On Auto Play Off B.L.E. On DivX(R) VOD Select Rating Unlock Password New Country Code US FRANÇAIS LOCK NEDERLANDS 1 Select “Rating” on the Setup menu using the buttons. 2 While “Rating” is selected, press .
T514_eng.qxd 11/9/2004 1:02 PM Page 16 Preparation BEFORE OPERATION COUNTRY CODE DVD-V Enter the code of a country/area whose standards were used to rate the DVD video disc, referring to the list (See “Country Code List”, page 28.) LOCK Disc Audio ENGLISH Disc Subtitle Code Set U Unlock Rating New Password CHANGING THE 4-DIGIT CODE 1 Follow Steps 1-2 as shown above to the left (Rating). 2 Enter the old code, and then press ENTER. 3 Select Change using buttons then press ENTER.
T514_eng.qxd 11/9/2004 1:02 PM Page 17 Operation OPERATION WITH DVD AND VIDEO CD IF A MENU SCREEN IS DISPLAYED The menu screen may be displayed first after loading a DVD or Video CD which offer a menu. DVD-V VCD 1.1 When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as follows: • Press SKIP or briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track.
T514_eng.qxd 11/9/2004 1:02 PM Page 18 Operation OPERATION WITH DVD AND VIDEO CD ENGLISH SLOW MOTION DVD-V VCD 2.0 VCD 1.1 1 Press SLOW or during playback. The player will enter SLOW mode. 2 Use the SLOW or to select the required speed: 1/16, 1/8, 1/4 or 1/2 (backward), or 1/16, 1/8, 1/4 or 1/2 (forward). 3 To exit slow motion mode, press PLAY. FRANÇAIS NOTE • Slow motion playback in reverse is not applicable for Video CD.
T514_eng.qxd 11/9/2004 1:02 PM Page 19 Operation NOTE The zoom function may not work for some DVDs. CAMERA ANGLE DVD-V If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback. • Press ANGLE repeatedly during playback to select a desired angle. The number of the current angle appears on the display. MARKER SEARCH DVD-V VCD 2.0 VCD 1.1 You can start playback from a memorized point. Up to nine points can be memorized.
T514_eng.qxd 11/9/2004 1:02 PM Page 20 Operation OPERATION WITH DVD AND VIDEO CD PLAYING A DVD-VR FORMAT DISC This unit will play DVD+R/RW discs recorded using the DVD-Video Recording format that has been finalized using a DVD-recorder. ENGLISH 1 Insert a disc and close the tray. The menu for the DVD-VR format appears on the TV screen. 2 Press to select the track and then press PLAY or ENTER and playback starts. FRANÇAIS NOTE: Unfinalized DVD+R/RW discs cannot be played in this DVD-player.
T514_eng.qxd 11/9/2004 1:02 PM Page 21 Operation 0:00:00 1/ 12 List Program 1-Music1 2-Music2 3-Music3 4-Music4 5-Music5 6-Music6 Clear All 7-Music7 DISPLAY Info PROGRAM Edit 3 Press to select a track then press PLAY or ENTER. Playback starts. During playback, the current track’s elapsed playing time will appear on the display window and menu. Playback will stop at the end of the disc. Press TITLE to move to the next page. Press MENU to move to the previous page.
T514_eng.qxd 11/9/2004 1:02 PM Page 22 Operation OPERATION WITH AUDIO CD AND MP3 / WMA / JPEG DISC ENGLISH MP3 WMA SEARCH CD 1 Press and hold SCAN or during playback. The player will now go into SEARCH mode. 2 Press and hold SCAN or repeatedly to select the required speed: X2, X4, X8 (backward) or X2, X4, X8 (forward). Search speed and direction are indicated on the menu screen. 3 To exit SEARCH mode, press PLAY. FRANÇAIS MP3 WMA RANDOM CD 1 Press RANDOM during playback or when playback is stopped.
T514_eng.qxd 11/9/2004 1:02 PM Page 23 Operation OPERATION WITH JPEG DISC 2 Press to select a folder, and ENTER. A list of files in the folder appears. Press RTN to move to the MP3/WMA-JPEG choice menu. PHOTO STILL PICTURE 1 Press PAUSE/STEP during slide show. The player will now go into PAUSE mode. 2 To return to the slide show, press PLAY or press PAUSE/STEP again. Preview JPEG Folder 1 TO FLIP THE PICTURE Press during showing a picture to flip the picture horizontally or a vertically.
T514_eng.qxd 11/9/2004 1:02 PM Page 24 Operation PROGRAMMED PLAYBACK VCD 2.0 VCD 1.1 CD ENGLISH PROGRAMMED PLAYBACK WITH AUDIO CD AND MP3/WMA DISC The Program function enables you to store your favorite tracks from any disc in the player memory. Program can contain 30 tracks. MP3 WMA PROGRAMMED PLAYBACK WITH VIDEO CD NOTE On a Video CD with PBC, you must set PBC to Off on the setup menu to use the Program function. See page 15 1 Insert Video CD and close the tray.
T514_eng.qxd 11/9/2004 1:02 PM Page 25 Operation ADDITIONAL INFORMATION ENGLISH LAST CONDITION MEMORY DVD-V VCD 2.0 VCD 1.1 This player memorizes the user settings for the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or switch off the player. If you load a disc that has its settings memorized, the latest stop position is automatically recalled.
T514_eng.qxd 11/9/2004 1:02 PM Page 26 Reference TROUBLESHOOTING Check the following guide for the possible cause of a problem before contacting service. ENGLISH SYMPTOM CAUSE CORRECTION FRANÇAIS DEUTSCH No power. • The power cord is disconnected. • Plug the power cord into the wall outlet securely. The power is on, but the DVD player does not work. • No disc is inserted. • Insert a disc. (Check that the DVD or, audio CD indicator in the display window is lit.) No picture.
T514_eng.
T514_eng.
T514_eng.qxd 11/9/2004 1:02 PM Page 29 Reference SPECIFICATIONS GENERAL ENGLISH AC 120V, 60 Hz 12W 435 X 38 X 241 mm (w x h x d) 2.4 kg 5ÞC to 35ÞC (41ÞF to 95ÞF) 5 % to 90 % SYSTEM FRANÇAIS Signal-to-noise ratio Harmonic distortion Dynamic range Semiconductor laser, wavelength 650 nm NTSC DVD (PCM 96 kHz): 8 Hz to 44 kHz DVD (PCM 48 kHz): 8 Hz to 22 kHz CD: 8 Hz to 20 kHz More than 100dB (ANALOG OUT connectors only) Less than 0.
T514_eng.qxd 11/9/2004 1:02 PM Page 30 www.NADelectronics.com ©2004 NAD ELECTRONICS INTERNATIONAL A DIVISION OF LENBROOK INDUSTRIES LIMITED All rights reserved.
