T 571 DVD / CD / MP3 Player GB Owner’s Manual
PAGE 2 INTRODUCTION Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
INTRODUCTION PAGE 3 Table of Contents Introduction Basic Operations ❏ ❏ ❏ ❏ ❏ ❏ ❏ Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . 2 Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . 3 IMPORTANT SAFETY INSTRUCTIONS . . . . . . 4-5 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Identification of Controls . . . . . . . . . . . . . . . . . 8-11 Front Panel/Display Window . . .
PAGE 4 INTRODUCTION IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing.
INTRODUCTION PAGE 5 IMPORTANT SAFETY INSTRUCTIONS (Cont’d) 13. Accessories, Carts, and Stands Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product.
PAGE 6 INTRODUCTION Precautions Notes on handling ❏ ❏ ❏ ❏ ❏ When shipping the DVD player, always use the original shipping carton and packing materials. For maximum protection, repack the unit as it was originally packed at the factory. Do not use volatile liquids, such as insect spray, near the DVD player. Do not leave rubber or plastic products in contact with the DVD player for a long time. They will leave marks on the finish.
INTRODUCTION PAGE 7 Notes on Discs This section shows you how to handle, clean, and store discs. On Handling Discs ❍ Do not touch the playback side of the disc. On Storing Discs ❍ ❍ ❍ ❍ Do not attach paper or tape to discs. On Cleaning Discs ❍ ❍ ❍ Do not store discs in a place subject to direct sunlight or near heat sources. Do not store discs in places subject to moisture and dust such as a bathroom or near a humidifier. Store discs vertically in a case.
PAGE 8 INTRODUCTION Identification of Controls Front Panel POWER indicator MENU button SKIP buttons RANDOM button REPEAT button ARROW buttons PAUSE button PLAY button Remote sensor SELECT/ ENTER button Display window POWER button OPEN/CLOSE button Disc tray STOP button SCAN buttons NEXT DISC button Display Window MP3 indicator PROGRAM indicator HDCD indicator Operating status indicator RANDOM indicator Repeat playback mode indicators CD indicator DVD indicator MP3 HD CD DVD 1 2 3 TITLE
INTRODUCTION PAGE 9 Identification of Controls (Cont’d) Rear Panel 12V TRIGGER INPUT jack By connecting this DVD player to another NAD audio component or system controller equipped with a 12V trigger output, you can remotely operate the T 571 power ON/OFF. VIDEO OUT jack COMPONENT VIDEO OUT/ PROGRESSIVE SCAN jacks S-VIDEO OUT jack VIDEO OUTPUT SELECT switch 12V TRIGGER IN COAXIAL DIGITAL AUDIO OUT jack POWER CORD Connect to an AC 120V, 60Hz outlet only.
PAGE 10 INTRODUCTION Identification of Controls (Cont’d) Remote Control You will find instructions for each of the remote control functions in the appropriate sections of this instruction manual.
INTRODUCTION PAGE 11 Identification of Controls (Cont’d) Preparing the Remote Control Insert the batteries into the remote control so you can use it to operate the DVD player. 1 Open the battery cover. 2 Insert batteries (AAA size). Operating with the Remote Control This section shows you how to use the remote control. Point the remote control at the remote sensor and press the buttons.
PAGE 12 CONNECTIONS Connecting to Surround Sound System Enjoying Dolby Digital Sound You can enjoy the high quality dynamic sound of Dolby Digital, Dolby Pro Logic, and 2 Channel Digital Stereo. Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the DVD player to a 5.
CONNECTIONS PAGE 13 Connecting to Surround Sound System (Cont’d) Enjoying Dolby Pro Logic Surround Sound Dolby Pro Logic Surround You can still enjoy the excitement of Surround Sound even if your A/V receiver does not offer Dolby Digital decoding. If your A/V receiver has a Dolby Pro Logic decoder, refer to the following connection diagram. 12V TRIGGER IN Connect one or two rear speakers. Note: The surround effect is greatly enhanced by using two surround speakers.
PAGE 14 CONNECTIONS Connecting to Surround Sound System (Cont’d) Enjoying 2 Channel Digital Stereo Sound 2 Channel Digital Stereo You can enjoy the dynamic sound of 2 Channel Digital Stereo by connecting this DVD player to a receiver equipped with a digital audio input and speaker system (right and left front speakers).
PAGE 15 CONNECTIONS Connecting to an Stereo System You can listen to the sound of audio CDs and DVD video discs in stereo. To S-VIDEO OUT 12V TRIGGER IN S-video cable (Not supplied) If the TV has an S-video input, connect the DVD player with the S-video cable.
PAGE 16 CONNECTIONS Connecting to a TV equipped with component video inputs PROGRESSIVE SCAN: Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video signal. Connecting to these inputs allows you to view the highest quality pictures with less flicker. COMPONENT VIDEO OUT: Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy higher quality picture playback.
CONNECTIONS PAGE 17 Connecting to a TV Connect the DVD player to your TV. VIDEO OUTPUT SELECT switch To S-VIDEO OUT 12V TRIGGER IN When using S-VIDEO OUT jack, set the VIDEO OUTPUT SELECT switch to S-VIDEO. To VIDEO OUT To AUDIO OUT (L/R) If the TV has an S-video input, connect the DVD player with the S-video cable.
PAGE 18 INITIAL SETTINGS Selection of initial settings Once the initial settings have been completed, the player can always be operated under the same conditions (especially with DVD discs). The settings will be retained in the memory until they are changed, even if the power is switched off.
INITIAL SETTINGS PAGE 19 Selecting disc languages This is to select the audio soundtrack language, subtitle language and the language used in title menus or DVD menus which will always be used for every disc to be played back. 1 At the setup screen, press D/E to select “Disc Audio” and press G. When you play back a DVD video disc, the DVD player automatically displays the pre-selected subtitle language if it is included on the disc.
PAGE 20 INITIAL SETTINGS Selecting Parental Control Rating Levels and Password This is to prohibit the playing of specified DVDs which are unsuitable for children. ● Some DVD discs contain a restriction level which enables parents to remove scenes or prevent playback of discs by children. DVD players are equipped with a password designed to prevent children from changing the level. POWER Selecting rating level (DVD only) 1 At the SETUP screen, press “Rating” and press G.
INITIAL SETTINGS PAGE 21 Selecting Parental Control Rating Levels and Password (Cont’d) Setting your password (DVD only) POWER OPEN/CLOSE SETUP REPEAT A-B RANDOM AUDIO SUBTITLE ANGLE SOUND TITLE If you change the rating level to “7” or lower, you must enter a 4-number “password” to prevent playback of discs with higher ratings. 1 MENU At the SETUP screen, press “Password” and press G.
PAGE 22 INITIAL SETTINGS Selecting TV Aspect Select the appropriate screen type according to your TV set; conventional size screen (4:3) or wide-screen (16:9). POWER 1 At the SETUP screen, press D/E to select “TV Aspect” and press G. Disc Audio 4:3 Letterbox Disc Subtitle 4:3 Panscan Disc Menu 16:9 Wide Rating OPEN/CLOSE Password SETUP REPEAT A-B RANDOM AUDIO SUBTITLE ANGLE SOUND TV Aspect Menu Language Progressive Scan Digital Audio Output TITLE MENU 5.
INITIAL SETTINGS PAGE 23 Selecting Menu Language Selects language for SETUP menus and displays on the TV. POWER 1 At the SETUP screen, press D/E to select “Menu Language” and press G. Disc Audio English Disc Subtitle Spanish Disc Menu French OPEN/CLOSE Rating Password SETUP REPEAT A-B RANDOM AUDIO SUBTITLE ANGLE SOUND TV Aspect Menu Language Progressive Scan TITLE Digital Audio Output MENU 5.
PAGE 24 INITIAL SETTINGS Selecting Progressive Scan If your television is high-definition or “digital ready” television, you may take advantage of the DVD Player’s progressive scan output for the highest video resolution possible. Make the component video connections as shown on page 16 or you may connect the component video jacks directly to the component video or HD component inputs on your TV or monitor.
INITIAL SETTINGS PAGE 25 Selecting Digital Audio Output Each DVD disc has a variety of audio output options. Set the player’s Digital Audio Output according to the type of audio system you use. 1 At the SETUP screen, press D/E to select Digital Audio Output and press G. Disc Audio DOLBY DIGITAL Disc Subtitle Stream/PCM Disc Menu PCM /PCM Rating Password POWER OPEN/CLOSE Sample Freq.
PAGE 26 INITIAL SETTINGS Others The DRC settings can be changed. 1 At the SETUP screen, press D/E to select “Others” and press G. Disc Audio DRC On Disc Subtitle Disc Menu POWER OPEN/CLOSE Rating Password SETUP REPEAT A-B RANDOM AUDIO SUBTITLE ANGLE SOUND TV Aspect Menu Language Progressive Scan Digital Audio Output TITLE MENU 5.1 Speaker Setup Others 1, 2 SELECT ENTER 2 DISPLAY RETURN ZOOM The setting of the selected item are changed between On and Off.
PAGE 27 INITIAL SETTINGS Table of Languages and Their Abbreviations Enter the appropriate code number for the initial settings “Audio”, “Subtitle” and/or “Menu” (See page 19).
PAGE 28 BASIC OPERATIONS Basic Playback This section shows you the basics on how to play back a DVD video disc. Preparations ● When you want to play back DVD video discs, turn on the TV and select the video input source connected to the DVD player. ● When you want to enjoy the sound of DVD video discs or audio CDs from the audio system, turn on the audio system and select the input source connected to the DVD player. ● For connection details, see pages 12 through 17.
BASIC OPERATIONS PAGE 29 Basic Playback (Cont’d) 5 POWER REPEAT A-B RANDOM AUDIO SUBTITLE ANGLE SOUND TITLE 6 MENU 7 SELECT ENTER DISPLAY Press PLAY to begin playback. Playback begins. You can skip this step if the disc is already playing automatically. The menu screen appears on the TV screen. In the case of interactive DVDs with playback, a menu screen appears on the TV screen.
PAGE 30 BASIC OPERATIONS Basic Playback (Cont’d) Stopping Play POWER Press STOP during playback. OPEN/CLOSE SETUP REPEAT A-B RANDOM AUDIO SUBTITLE ANGLE SOUND TITLE Resume Play ● When play is stopped, the unit records the point where STOP was pressed (RESUME function). Press PLAY and play will resume from this point.
BASIC OPERATIONS PAGE 31 Basic Playback (Cont’d) Skipping Discs Press NEXT DISC during playback or in the stop mode. ● Each time the button is pressed, the next disc tray is selected. DVD 1 2 3 TITLE CHP/TRK 5 4 NEXT DISC 1 2 3 5 4 Notes POWER OPEN/CLOSE SETUP REPEAT A-B RANDOM AUDIO SUBTITLE ANGLE SOUND ❍ When the NEXT DISC is pressed during playback or in the stop mode, the disc tray advances to the next disc.
PAGE 32 BASIC OPERATIONS Special Playback Still Picture (Pause) POWER Press PAUSE/STEP during playback. OPEN/CLOSE ● SETUP REPEAT A-B RANDOM AUDIO SUBTITLE ANGLE SOUND TITLE DVD The player will be placed in the still picture mode. ● CD The player will be placed in the pause mode. MENU Frame Advance (DVD only) Press PAUSE/STEP during still playback. SELECT ENTER DISPLAY (Each time you press PAUSE/STEP, the picture advances one frame) RETURN To resume normal playback, press PLAY.
BASIC OPERATIONS PAGE 33 Special Playback (Cont’d) You can play back discs at various speeds. To Scan at fast forward or fast reverse playback. Press the SCAN POWER or [TV screen] OPEN/CLOSE FF X2 SETUP REPEAT A-B RANDOM AUDIO SUBTITLE ANGLE SOUND TITLE SELECT ENTER RETURN ZOOM MARKER — SEARCH SCAN SCAN ( / PLAY NEXT DISC PAUSE/STEP To return to normal playback, press PLAY. SKIP PLAY STOP ) GG X2 ● The speed of advance (reverse) is relatively slow at first.
PAGE 34 OPERATION USING GRAPHICAL USER INTERFACE (GUI) MENU ICONS General Information about GUI menu icons This unit features GUI Menu Icons showing disc information (title/chapter/track number, elapsed playing time, audio/subtitle language, angle, and sound) and player information (repeat play, play mode, marker, etc.). Some icons only show the indicated information. Other icons allow the settings to be changed. Common procedures 1 ● Title function can be accessed from the stop mode.
OPERATION USING GRAPHICAL USER INTERFACE (GUI) MENU ICONS PAGE 35 Detailed description of each GUI menu icon You can view information about a disc and its operational status on the TV screen. Press DISPLAY during playback. [TV screen] DVD GUI 1 1 0:16:57 1 ENG D 6 CH OFF 1 NORM. Press DISPLAY during playback.
PAGE 36 ADVANCED OPERATION Using a title menu Some movie discs may contain two or more titles. If the disc has a title menu recorded on it, the TITLE button can be used to select the movie title. (The details of operation differ depending on the disc used.) ● Selecting a title may not be possible on certain DVD discs. 1 TITLE 1 2 DISPLAY RETURN ZOOM 2 MARKER — SEARCH SCAN SKIP PLAY Press D/E/F/G and press SELECT/ENTER or PLAY, or press the numeric button(s), to select desired title.
ADVANCED OPERATION PAGE 37 Changing subtitle language It is possible to change the subtitle language to a different language from the one selected at the initial settings. (See page 19 for further info.) This operation works only with discs on which multiple subtitle languages are recorded. 1, 2 SETUP REPEAT A-B RANDOM AUDIO SUBTITLE ANGLE SOUND TITLE 1 MENU ❍ ❍ In some cases, the subtitle language is not changed to the selected one immediately.
PAGE 38 ADVANCED OPERATION Viewing from another angle Some DVDs may contain scenes which have been shot simultaneously from a number of different angles. For these discs, the same scene can be viewed from each of these different angles using the ANGLE button. (The recorded angles differ depending on the disc used.) 1 Number of angle being played back. 2 1 2 Press ANGLE during playback. 3 1 Press ANGLE repeatedly until the desired angle is selected.
PAGE 39 ADVANCED OPERATION Repeat Play Repeating viewing (listening) Repeating sections between two specific points (A-B repeat) Press REPEAT during playback. Each time this button is pressed, the TV screen changes as shown below and the disc will repeat a chapter or title (DVD) or a track (CD). 1 Press A-B during play at the point where repeat play is to start (A). A • DVD Repeat of chapter being played • You can select “OFF” at this step by pressing CLEAR.
PAGE 40 ADVANCED OPERATION Storing markers in memory to be viewed (listened to) again Storing a MARKER in the DVD memory is similar to marking your page in a book. It allows you to quickly return to any point on the disc. Storing a marker in the memory 1 Press MARKER during play at the starting point to be viewed (listened to) again. 1/9 Indicates “1/9” is stored in the memory. Up to 9 marks can be stored in the memory.
ADVANCED OPERATION PAGE 41 Zoom Feature The Zoom function allows you to enlarge the video image and to move through the enlarged image. TITLE 2 DISPLAY RETURN ZOOM 2 Press D/E/F/G buttons to move through the zoomed picture. 3 Press CLEAR to resume normal playback. MARKER — SEARCH SCAN SKIP PLAY Notes Some discs may not respond to the Zoom feature. Zoom does not work on subtitles or menus included on DVD video discs.
PAGE 42 ADVANCED OPERATION Program play The player plays the tracks on the disc in the order you specify. 1 Note: Program play function is possible only with audio CDs. It does not work with DVD movie discs. Press PROGRAM in the stop mode. The program playback screen appears on the TV screen. Program Step 1 1 Clear All POWER OPEN/CLOSE • To exit the screen, press PROGRAM or RETURN.
ADVANCED OPERATION PAGE 43 Playback with MP3 To play an MP3 file 2 1 SELECT ENTER DISPLAY Load an MP3 disc. The MP3 menu is displayed. RETURN MP3 Program MP3-1 ZOOM MARKER — SEARCH TRACK 1.mp3 TRACK 2.mp3 2 SCAN SKIP PLAY TRACK 3.mp3 TRACK 4.mp3 STOP TRACK 5.mp3 TRACK 6.mp3 TRACK 7.mp3 TRACK 8.mp3 To play an MP3 file repeatedly TRACK 9.mp3 Clear All ● If you press REPEAT once during play, the current MP3 file will play repeatedly.
PAGE 44 ADVANCED OPERATION Playback with MP3 (Cont’d) To program play an MP3 file 4 SELECT ENTER DISPLAY RETURN ZOOM Load an MP3 disc. 2 Press STOP to stop playback. 3 Press PROGRAM to enter the Program Edition mode in the stop mode. MARKER — SEARCH SCAN 5 1 SKIP PLAY STOP NEXT DISC PAUSE/STEP 1 2 3 4 5 6 7 8 CLEAR The E mark appears on the right of the word Program on the right side of MP3 menu. Press RETURN to exit the Program Edition mode, the E mark will disappear.
REFERENCE PAGE 45 Disc Requirements/Copyright Information Playable Discs This DVD player can play back the following discs. Disc mark Contents Disc size 12 cm DVD video discs Audio+Video (moving pictures) Maximum playback time Approx. 4 hours (single sided disc) Approx. 8 hours (double sided disc) 8 cm Approx. 80 minutes (single sided disc) Approx.
PAGE 46 REFERENCE Before Calling Service Personnel Symptoms and Correction Check the following guide for the possible cause of a problem before contacting service. Symptom Cause Correction No power. • The power cord is disconnected. • Plug the power cord into the wall outlet securely. The power is on, but the DVD player does not work. • No disc is inserted. • Insert a disc. (Check that the DVD or, audio CD indicator in the DVD display is lit.) No picture.
REFERENCE PAGE 47 Specifications [DVD player] DVD player/Outputs/Supplied Accessories Power supply AC 120V, 60 Hz Power consumption 16 W Weight 12.6 lbs (5.7 kg) External dimensions (W X H X D) 17” X 4.7” X 16.2” (430 x 118 x 411 mm) Signal system NTSC Laser Semiconductor laser, wavelength 650 nm (DVD), 780 nm (CD) Frequency range (audio) 4 Hz to 20 kHz Signal-to-noise ratio (audio) More than 95 dB (EIAJ) Dynamic range (audio) More than 90 dB (EIAJ) Harmonic distortion (audio) 0.
P/NO: 3834RS0023W Printed in Korea
