User's Manual

CONNECTIONS PAGE 17
Connecting to a TV
Connect the DVD player to your TV.
12V
TRIGGER
IN
S-video cable
(Not supplied)
To S-VIDEO OUT
To AUDIO OUT (L/R)To VIDEO OUT
Audio/Video cable
(supplied)
To video input
To audio inputs
To S-video input
TV or monitor with
audio/video inputs
VIDEO OUTPUT SELECT switch
❍ Refer to the owner’s manual of your TV for TV operating instructions.
❍ Before you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
❍ Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, the playback picture will be distorted
because DVD video discs are copy protected.
Warning
Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL OUT jack of this
DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well
as the speakers (Refer to “Selecting Digital Audio Output” on page 25).
Notes
If the TV has an S-video input, connect
the DVD player with the S-video cable.
When using S-VIDEO OUT jack, set the VIDEO
OUTPUT SELECT switch to S-VIDEO.