User's Manual

PAGE 32 BASIC OPERATIONS
Press PAUSE/STEP during playback.
● DVD
The player will be placed in the still picture mode.
● CD
The player will be placed in the pause mode.
Press PAUSE/STEP during still playback.
(Each time you press PAUSE/STEP, the picture advances
one frame)
To resume normal playback, press PLAY.
Skipping forward
Press SKIP
during playback.
A chapter (DVD) or a track (CD) is skipped each time the
button is pressed.
Skipping back
Press SKIP
during playback.
● When the button is pressed once midway through a
chapter/track, the player returns to the start of that
chapter/track. When it is pressed again, a chapter/track is
skipped each time the button is pressed.
HDCD is a process that increases the fidelity of both special-
ly encoded HDCD discs and standard CD audio discs. When
an HDCD-encoded disc is playing, the special decoder is
automatically activated and the HDCD Indicator lights. No
user intervention is required.
To enjoy the benefits of HDCD, your DVD Player must be
connected to your A/V receiver via the Analog Audio Outputs.
However, if your A/V receiver or surround processor is
equipped with built-in HDCD decoding, you may also use
a Coaxial or Optical digital audio connection so that the
HDCD processing is done there.
Still Picture (Pause)
Frame Advance (DVD only)
Skipping chapters and tracks
forward or back
HDCD Playback
Special Playback
PLAY
CLEAR PROGRAM
DISPLAY
RETURN
SELECT
ENTER
TITLE MENU
AUDIO SUBTITLE SOUNDANGLE
SETUP REPEAT RANDOM
POWER OPEN/CLOSE
A-B
123
45
6
7
8
0
9
SLOW
ZOOM MARKER — SEARCH
PAUSE/STEP
NEXT DISC
STOP
PLAY
SCAN SKIP
STOP
PAUSE/
STEP
SKIP
(/)
How To Set The Video Mode
●
With certain DVD disc, the playback picture is
flickering or Dot Crawl is shown on straight
lines. That means Vertical interpolation or
De-interlace is not perfectly matched with DVD
disc. In that case, the picture quality can be
improved with changing video mode.
●
To change the video mode, press and hold
DISPLAY button on the remote control about
3 seconds during playback of DVD disc.
Changed video mode number is displayed on
the TV screen. Check whether video quality is
improved. You can repeat above procedure until
desired picture quality appears.
●
Procedure of video mode is changed;
MODE2 → MODE3 → MODE4 → MODE5 →
MODE1.
●
If you turn off the the power, the video mode will
be back to initial state (Auto).