Owner's Manual

CONTROL FEATURES
Use the following control buttons in navigating through the iPod menu
options. Since the AVR 4 will be the primary controller in most cases, we will
focus on remote-controlled operations. Note that for other NAD IPD models
(like NAD IPD 2) that have remote control, below controls have the same
function as those available in the NAD IPD model’s remote control.
DISP
During playback, toggle [DISP] key of AVR 4 to show in the VFD upper line
the following
• Current iPod playback mode (shue, repeat modes)
• Song title
• Artist Name
• Album title
If there is no information available, the display will show “Unknown Song”,
“Unknown Artist” or “Unknown Album” as applicable. Aside from this
information, the lower line will display the current title’s song number
allocation and time elapsed.
D/F
While at menu options or selection lists, toggle [ D/F ] to go up or down
the options, lists or song titles. Press and hold [ D/F ] to quickly scroll
through the song titles.
[ 9/0 ]
During playback or PAUSE mode, press and hold [ 9/0 ] for fast forward
or backward scanning of current song. Press [ 0 ] to skip forward to the
next song or [ 9 ] to skip back to the previous song.
PAUSE  j  / PLAY  4 
Press PAUSE [ j ] during playback to stop playback temporarily. Resume
play by pressing PAUSE [ j ] again or PLAY [ 4 ].
A/S APPLICABLE ONLY IN iPod MENU MODE
Press [ A ] to return to a previous option or menu selection. Press [ S ] to
move forward an option or make a selection.
ENTER APPLICABLE ONLY IN SIMPLE MODE
Press [ENTER] to select an option or start playback.
NAD IPD 2
The NAD IPD 2 has its own remote control - the DR 1. DR 1 can be used
to control NAD IPD 2 only at “Simple Mode”. When using the DR 1 to
command your iPod player docked in the NAD IPD 2, you have to refer to
your iPod player’s own display screen to make full use of its feature; there is
no OSD at this condition
In addition to the above commands common to the DR 1, below are the
descriptions of the other DR 1 control buttons.
LIGHT
Press [LIGHT] to turn ON the backlight of your iPod player if it is at idle
mode.
MENU
Press [MENU] to return to previous option or menu selection
ENTER
Press [ENTER] to select an option or start playback.
m REPEAT
Toggle to initiate repeat mode as follows - repeat one song, repeat all songs
or cancel repeat mode.
, RANDOM
Toggle to initiate playback in random order. There are three random modes
- Shue Song, Shue Album or Shue O.
TO VIEW VIDEOS OR PHOTOS LOADED IN YOUR iPod
Videos or photos uploaded in your iPod can be viewed directly via the
T 748. The following are the steps
1 Make sure that the “TV Out” setting of your iPod’s Video Settings menu is
at “On” mode and appropriate “TV Signal” is chosen.
2 Video or photo le selections and playback procedures are managed
directly from your iPod player and not through the T 748. You must exit
completely from the T 748’s Setup Menu or Menu Select OSD for you
to be able to navigate through your iPod player’s video or photo menu
options. A more direct way is by going to the “iPod Setup” menu and set
“Enabled” to “No”.
3 With the NAD IPD’s S-VIDEO OUT and AUDIO OUT ports connected to
the T 748’s AUDIO 2/S-VIDEO input or to any other assignable input, you
can now directly enjoy via T 748 your video or photo le selections as
uploaded in your iPod. Make sure that you select the correct “Source
Number” of the T 748. Note that if “Enabled” from “iPod Setup” is set
to “No”, ensure that Source 5 is enabled and analog audio and video
settings are assigned to “A2” and “S1” respectively.
NOTE
For other navigation functions, please refer to your iPod player’s owner’s
manual. Depending on the iPod player model, some other functions
maybe controlled using the applicable T 748 navigation controls.
iPod is a trademark of Apple, Inc., registered in the U.S. and other countries.
OPERATION
LISTENING TO YOUR iPod PLAYER
36
ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ