Owner's Manual

1 DIGITAL AUDIO IN (COAXIAL 1-3, OPTICAL 1-3)
• Connect to the corresponding optical or coaxial digital output of
sources such as CD or BD/DVD players, digital cable box, digital
tuners and other applicable components.
• Coaxial and Optical digital input association is congurable via the
Source Setup item of the Setup Menu OSD.
DIGITAL AUDIO OUT (OPTICAL, COAXIAL)
Connect the optical or coaxial DIGITAL OUT to the corresponding
digital audio input of compatible devices such as receivers, computer
soundcard or other digital processors.
2 RS 232
NAD is a certied partner of AMX and Crestron and fully supports
these external devices. Check out the NAD website for information
about AMX and Crestron compatibility with NAD. See your NAD audio
specialist for more information.
• Connect this interface using RS-232 serial cable (not supplied) to
any Windows compatible PC to allow remote control of the T 757
via compatible external controllers.
· Refer to the NAD website for information about RS232 Protocol
documents and PC interface program.
3 DAB MODULE INPUT (230V version model only)
The T 757 is compatible only with the NAD DAB Adaptor module
models DB 1 or DB 2.
• Plug-in the other end of the Mini-Din connector from the NAD DAB
Adaptor module output port into this socket.
• With DAB, you can receive CD-like quality programs without any
annoying interference and signal distortion.
• Refer also to the “LISTENING TO DAB RADIO” segment of the
“OPERATION” section.
NOTE
The external NAD DAB Adaptor module is not supplied with your T 757.
4 XM MODULE INPUT (120V version model only)
• Connect XM radio cable to this socket. Follow the instructions that
came with your XM radio.
• With XM radio, there are more than 100 channels of music, news,
sports, comedy, talk and entertainment. You will nd that the
coverage is continent wide. The music quality is digital with many
commercial-free music channels.
• Refer also to the “LISTENING TO XM RADIO” segment of the
“OPERATION” section.
NOTE
The external XM radio is not supplied with your T 757.
5 MONITOR OUT
• Connect to the video input of a monitor/television using quality
dual-RCA cables designed for video signals.
6 AUDIO 1-3/VIDEO 1-2/S-VIDEO 1
• These comprise the T 757’s other sets of principal input. Connect
these S-Video, composite video, and analog audio input ports to
the corresponding output ports of source components such as DVD
players or cable/satellite boxes.
• AUDIO 3 and S-VIDEO 1 are the assigned default ports for the audio/
video output of the separately sold NAD IPD (NAD IPD Dock for
iPod) 1, NAD IPD 2 and later variants.
IDENTIFICATION OF CONTROLS
REAR PANEL
1 2 3 4 6 7 8 9 10
16 17
18
5
11 12 13 14 15
ATTENTION!
Please make sure that the T 757 is powered o or unplugged from the mains power source before making any connections. It is also advisable to power
down or unplug all associated components while making or breaking any signal or AC power connections.
8
ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ