User's Manual

11
ENGLISH
FRANÇAISDEUTSCHNEDERLANDSESPAÑOL
ITALIANO
PORTUGUÊS
SVENSKA
1 The power buttons labelled ON and OFF will toggle the T585 from standby to the on-position, only
if the POWER rocker switch on the left rear of the T585 is in the ON position.
2 The SETUP button is used in conjunction with the television monitor’s On Screen Display (OSD)
connected to the T585, (see the section on ‘Initial Set-up Settings’) to edit the DVD’s OSD.
3 There are ten transport control buttons that allows one to directly control the DVD/VCD/CD media.
These buttons handle the basic operations of; Open/Close of the media tray, Stop , Pause ,
Skip forward and back , Play , Scan tracks , and Slow scan tracks .
4 The navigation buttons in conjunction with the ENTER button allows one to navigate the
OSD, title and menu screens.
5 The RTN button is used for back up navigation of various DVD and SETUP menus.
6 The TITLE and MENU buttons are used to display via OSD, the title headings and menus of the DVD,
VCD/S VCD with PBC and MP3 CD media when available.
7 The DISPLAY button will show an OSD for advanced DVD/VCD/CD player configuration, when the
T585 is in play or pause mode.
8 The PROGRAM, CLEAR, buttons are used for programming the tracks on CD media.
9 The REPEAT button when pressed once, repeats an audio CD track or DVD chapter. If the button is
pressed twice the entire audio CD is repeated or the DVD chapters are repeated.
10 The REPEAT A-B button is used to repeat a specific start to stop section of an audio CD or DVD/VCD.
During play mode of the media, press the button once to store the start point of the T585 in memory.
When pressed a second time the stop point of the media is stored. The T585 will play the selected
section(s) until REPEAT A-B button is pressed a third time.
11 The AUDIO button will allow one to switch the audio language of the DVD media only if the DVD
media supports the AUDIO button feature.
12 The SUBTITLE button will allow one to switch on or off the various types of subtitles for the DVD
media being viewed, only if the DVD media supports the SUBTITLE button feature.
13 The ANGLE button will allow one to select various viewing angles of each movie scene only if the DVD
media supports this feature.
14 The number buttons are used for inputting numeric values when navigating the menu, title, and
display OSDs or when directly selecting media tracks.
15 The MARKER and SEARCH buttons allows one to set up to 9 bookmarks on a DVD, VCD and CD for
quick reference. After each marker is stored one then presses the SEARCH then navigation buttons to
play the bookmark.
16 The ZOOM button allows one to expand the viewed image up to 32 times. To clear the zoom menu,
press the CLEAR button.
17 The RANDOM button allows one to randomly play audio CD media. In conjunction with the REPEAT
buttons the audio CD would randomly play all tracks on an audio CD. This feature is not available on
most DVD/VCDs.
18 The RESOLUTION button allows one to select 480/576, 720p, and 1080i video resolutions from the
Component-YUV, VGA, SCART and HDMI output.
NOTE: Not all resolutions are available on all outputs. See chart on page 37
// /
/
/
/
REMOTE CONTROL
Identification of Controls
T585 Safety.qxd 3/23/2006 4:12 PM Page 11