User Manual

All specs are measured according to IHF 202 CEA 490-AR-2008 standard. THD is measured using AP AUX 0025 passive lter and AES 17 active lter.
AUDIO SPECIFICATIONS
LINE IN/HEADPHONE OUT
THD (20 Hz – 20 kHz) <0.03 % in 300 ohms at 2 V out
Signal-to-Noise Ratio >100 dB (A-weighted, 32 ohms, ref. 2V out, unity gain)
Frequency response ±0.3 dB (20 Hz - 20 kHz)
Output impedance 68 ohms
LINE IN/SPEAKER OUT
Continuous output power into 8 ohms and 4 ohms 40W (ref. 20 Hz-20 kHz at rated THD, both channels driven)
THD (20 Hz – 20 kHz) <0.03 % (250 mW to 40 W, 8 ohms and 4 ohms)
Signal-to-Noise Ratio >95 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
>97 dB (A-weighted, 500 mV input, unity gain in 32 ohms)
Clipping power (at 1 kHz 0.1 % THD) >45 W in 8 ohms
>60 W in 4 ohms
IHF dynamic power 8 ohms: 90 W
4 ohms: 120 W
2 ohms: 170 W
Damping factor >200 (ref. 8 ohms, 1 kHz)
Frequency response ±0.3 dB (20 Hz - 20 kHz, Tone Defeat ON)
Treble: ± 5dB at 10 kHz
Bass: ± 8 dB at 100 Hz
Channel separation >70 dB (1 kHz)
Maximum input level 4.3V (1 kHz THD 0.1%)
Input sensitivity (for 40 W in 8 ohms) 200 mV
Standby power <0.5 W
PHONO IN/SPEAKER OUT
THD (20 Hz – 20 kHz) <0.03 % (1 W to 40 W, 8 ohms and 4 ohms)
Signal-to-Noise Ratio >75 dB with IHF MM cartridge (A-weighted, ref. 5mV input 1 kHz and 1W output in 8 ohms)
Frequency response (RIAA deviation) ±0.3 dB (20 Hz - 20 kHz, Tone Defeat ON)
Note: The RIAA response is consistent with a pre-emphasis that is rolled o at 50kHz by a
second order lter, such as used in Neumann cutting lathes.
Maximum input level 71 mV (1 kHz THD 0.1%)
Input sensitivity (for 40 W in 8 ohms) 2.95 mV
DIMENSION AND WEIGHT
Gross dimensions (W x H x D) 435 x 90 x 285 mm
17 ⁄ x 3 ⁄ x 11 ¼ inches
Net weight 5.5 kg (12.1 lbs)
Shipping weight 6.4 kg (14.1 lbs)
Gross dimension includes feet, volume knob and extended rear panel terminals.
Specifications are subject to change without notice. For updated documentation and features please log onto www.nadelectronics.com for the latest information about your C316BEE.
REFERENCE
SPECIFICATIONS
11
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ