Operation Manual
OVERALL SPECIFICATIONS
LINE LEVEL INPUT
Input impedance (R and C) 100 kΩ+ 320 pF
Input sensitivity 158 mV (ref. 500 mV out)
Maximum input signal >9 V
Signal/Noise ratio, A-weighted >108 dB (ref. 500 mV in 500 mV out, volume set to unity gain)
>106 dB (ref. 2V out, Volume maximum)
Channel Separation >80 dB (ref. 1 kHz/10 kHz)
Frequency response ± 0.1 dB (ref. 20 Hz - 20 kHz, Tone defeat ON)
± 0.5 dB (ref. 20 Hz - 20 kHz, Tone defeat OFF)
Frequency response (subwoofer out) 100 Hz (ref. -3 dB)
OUTPUT
Output impedance - Pre out 75 Ω
Tape out Source Z + 440 Ω
Sub out 100 Ω
Headphones 10 Ω
Maximum output level - Pre out >10 V into 600 Ω
Tape out >10 V into 10 kΩ load
Sub out >7 V into 1 kΩ load
Headphones >5 V into 600 Ω
>2 V into 32 Ω
THD (CCIF IMD, DIM 100) >0.001 % (ref. 20 Hz – 20 kHz, 2V out)
TONE CONTROLS
Treble ± 5 dB at 10 kHz (ref. 2V in 500 mV out)
Bass ± 5 dB at 100 Hz (ref. 2V in 500 mV out)
POWER CONSUMPTION
Normal operation 21 W
Standby mode <0.8 W
PHONO INPUT
Input impedance - MC 40,100,600 Ω (R)
1 nF (C)
MM 47 kΩ (R)
220,300,400 pF (C)
Input sensitivity - MC 0.15 mV (ref. 1 kHz 500 mV out)
MM 2.63 mV (ref. 1 kHz 500 mV out)
Input overload - MC 1 mV/10 mV/100 mV (20 Hz/1 kHz/20 kHz)
MM 16 mV/147mV/1.4V (20 Hz/1 kHz/20 kHz)
Gain - MC in - Tape out 59.8 dB
1
(ref. 1 kHz, 10 kΩ load)
MM in - Tape out 36.5 dB (ref. 1 kHz, 10 kΩ load)
THD (CCIF IMD, DIM 100) <0.009 % (ref. 20 Hz – 20 kHz, 5 Vrms Tape out)
Signal/Noise ratio, IHF A-weighted - MC >78 dB
2
(ref. 0.5 mV)
MM >86 dB
3
(ref. 0.5 mV)
RIAA response accuracy ± 0.5 dB (ref. 20 Hz – 50 Hz)
± 0.3 dB (ref. 50 Hz – 20 kHz)
Infrasonic lter 10 Hz (at -3 dB)
5 Hz (at -14 dB)
Channel Separation - MC >60 dB (ref. 1 kHz/10 kHz)
MM >60 dB (ref. 1 kHz/10 kHz)
DIMENSION AND WEIGHT
Dimensions (W x H x D) 435 x 80 x 286 mm (Net)
435 x 99 x 315 mm (Gross
4
)
Net weight 6 kg
Shipping weight 7.8 kg
LEGEND:
1 Measured with 30 Ω generator impedance, MC input resistance set to 600 Ω.
2 Measured with 10 Ω input termination.
3 Measured with MM cartridge connected (600mH+ 600 Ω)
4 Gross dimensions include feet, volume control and extended rear panel terminals.
Specications are subject to change without prior notice. For updated documentation and features, please log onto www.NADelectronics.com for the latest
information about C 165BEE.
REFERENCE
SPECIFICATIONS
13
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ