Operation Manual

11 SPEAKERS

• Connect C 338’s Right speaker terminals marked “R +” and “R-” to

the corresponding “+” and “-“ terminals of your designated right

speaker. Repeat the same for C 338’s Left speaker terminals and

corresponding left speaker.

• Double check the speaker connections before powering up the

C 338.

IMPORTANT NOTES

• The blue terminals must never be connected to ground (earth).

• Never connect the blue terminals together or to any common ground

device.

• Do not connect the output of this amplier to any headphone adapter,

speaker switch or any device that uses common ground for left and

right channels.

NOTE

• Use 16 gauge (American Wire Gauge or AWG) or lower stranded wire.

Connections to the C 338 can be made with banana-type plugs.

• Bare wire or pins can also be used by loosening the terminal’s plastic

nut, making a clean, neat connection and re-tightening. To minimize

the danger of a short circuit, ensure that only 1/2-inch of exposed wire

or pin is used to connect and no loose strands of speaker wire.

IDENTIFICATION OF CONTROLS

REAR PANEL

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ