NEDERLANDS Owner’s Manual SVENSKA DEUTSCH ITALIANO ESPAÑOL FRANÇAIS Compact Disc Player ENGLISH C 546BEE РУССКИЙ ®
IMPORTANT SAFETY INSTRUCTIONS ENGLISH SAVE THESE INSTRUCTIONS FOR LATER USE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE AUDIO EQUIPMENT. FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA 1 Read instructions - All the safety and operating instructions should be read before the product is operated. 2 Retain instructions - The safety and operating instructions should be retained for future reference.
22 23 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION The C 546BEE employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. Should the unit require maintenance, contact an authorized service location.
IMPORTANT SAFETY INSTRUCTIONS ENGLISH FRANÇAIS INFORMATION ABOUT COLLECTION AND DISPOSAL OF WASTE BATTERIES (DIRECTIVE 2006/66/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF EUROPEAN UNION) (FOR EUROPEAN CUSTOMERS ONLY) Batteries bearing any of these symbols indicate that they should be treated as “separate collection” and not as municipal waste.
INTRODUCTION FRANÇAIS ESPAÑOL One more thing: We urge you to register your C 546BEE ownership on the NAD Worldwide Web site: http://NADelectronics.com/warranty For warranty information contact your local distributor. NAD SHALL NOT BE HELD LIABLE FOR ANY TECHNICAL OR USER INTERFACE DISCREPANCIES IN THIS MANUAL. THE C 546BEE OWNER’S MANUAL MAY BE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. CHECK OUT THE NAD WEBSITE FOR THE LATEST VERSION OF THE C 546BEE OWNER’S MANUAL. ITALIANO REFERENCE TROUBLESHOOTING . .
INTRODUCTION GETTING STARTED ENGLISH UNPACKING AND SETUP QUICK START WHAT’S IN THE BOX Packed with your C 546BEE you will find: • An audio cable connector • The CD 9 remote control with two AA batteries • A detachable AC power cord • This owner’s manual on CD-ROM In case you simply cannot wait to experience the performance of your new NAD C 546BEE, we provide the following “Quick Start” instructions to get you underway.
IDENTIFICATION OF CONTROLS 11 ENGLISH FRONT PANEL 12 FRANÇAIS C 546BEE The C 546BEE can also be switched ON from standby mode by pressing [PLAY/PAUSE/SKIP] knob on the front panel. Pressing CD 9’s [ON], [ ] or [ ] buttons will also wake up the C 546BEE from standby mode. If the disc tray is open and the Standby button is pressed, the disc tray will draw close and the C 546BEE goes to standby mode.
IDENTIFICATION OF CONTROLS FRONT PANEL ENGLISH 6 RANDOM: This button when pressed will engage or disengage random playback mode. When engaged (a corresponding “RANDOM” icon is illuminated in the VFD), random playback of tracks or files will begin by pressing [PLAY/PAUSE/SKIP] from STOP mode or rotating [PLAY/PAUSE/ SKIP] during playback mode. Press [RANDOM] again to return to normal playback (“RANDOM” icon in the VFD is extinguished).
IDENTIFICATION OF CONTROLS FRANÇAIS ENGLISH REAR PANEL 1 2 3 4 5 3 +12V TRIGGER IN: This input allows the C 546BEE to be switched remotely to standby and ON by ancillary equipment, such as an amplifier, preamp, AV processor, etc. The controlling device must be equipped with a 12 V trigger output to use this feature. Connect this +12V-trigger input to the remote component’s corresponding +12V DC output jack using a mono cable with 3.5mm male plug.
IDENTIFICATION OF CONTROLS CD 9 REMOTE CONTROL ENGLISH ON: Switch ON C 546BEE. OFF: Switch OFF C 546BEE. CD: Select CD as the active source. USB: Select USB as the active source. OPT: Select optical input as the active source. Not applicable for C 546BEE. SRC: Toggle to select desired SRC mode. Not applicable for C 546BEE. RAND: Play tracks/files in random mode. RPT: Repeat track, file or whole disc. RPT A-B: Setup repeat sequence. FRANÇAIS FILTER: Switch between NORMAL and SLOW bandwidth.
OPERATION PROGRAMMING The program function enables you to store your favorite tracks from any disc in the player memory. When programming a sequence of tracks, the C 546BEE must be in STOP mode. Using the CD 9 remote control, enter your desired program sequence through the following steps 1 Press [PROG] button of CD 9 remote control. The display indicates “P00 T000”. The “000” in the “T000” keeps on blinking, meaning the player is awaiting the first Program entry.
OPERATION USING THE C 546BEE – USB MODE ENGLISH The C 546BEE can play back MP3/WMA files stored in external USB (Universal Serial Bus) devices. The following are the C 546BEE’s capabilities with respect to USB device playability.
OPERATION DIM Use [PROG] button to start, review, edit or exit programming mode. In combination with [PROG] button, the [CLEAR] button allows the deletion of a programmed track during program review or edit sequence. Refer also to the item about “PROGRAMMING” at the “USING THE C 546BEE – CD MODE” section of the “OPERATION” page. FILTER REPEAT A particular track or file can be repeatedly played back by pressing [RPT] button. Toggle this button to repeat a track/file, folder, all tracks or all files.
REFERENCE TROUBLESHOOTING ENGLISH CONDITION POSSIBLE CAUSES POSSIBLE SOLUTIONS FRANÇAIS No power. • The power cord is disconnected. • Plug the power cord into the wall outlet securely. The power is ON, but the C 546BEE does not work. • No disc is inserted. • Insert a disc. The C 546BEE does not start playback. • The disc is loaded upside down. • Reload the disc with the label side UP. • The disc is too dirty. • Clean the disc.
REFERENCE Output level 2.2 ± 0.2 V Optical: -22.5 ± 3.5 dBm Frequency response ±1 dB (ref. 0 dB 20 Hz - 16 kHz) Coaxial: 650 ± 150 mV Total harmonic distortion <0.03% (ref. 0 dB 1 kHz, Audio LPF) ±0.3 dB (ref. 0 dB 20 Hz-1 kHz) Signal/Noise ratio 118 dB (ref. 0 dB 1 kHz, A-weighted Pause) ±0.5 dB (ref. 0 dB 5 kHz-20 kHz) Total harmonic distortion <0.01% (ref. 1 kHz, Audio LPF) Signal/Noise ratio 118 dB (ref. 1 kHz, A-weighted LPF Stop, Pause) Channel balance ±0.5 dB (ref.
www.NADelectronics.com ©2011 NAD ELECTRONICS INTERNATIONAL A DIVISION OF LENBROOK INDUSTRIES LIMITED All rights reserved. NAD and the NAD logo are trademarks of NAD Electronics International, a division of Lenbrook Industries Limited. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International.
