Owner`s manual

The C 546BEE can play back MP3/WMA les stored in external USB
(Universal Serial Bus) devices. The following are the C 546BEE’s capabilities
with respect to USB device playability.
USB SUPPLEMENTARY INFORMATION
Maximum number of folders supported 128
Maximum le in one folder 511
Maximum le in device 65408
Maximum number of sub-directory 8
Maximum number of bytes supported for Folder/File name 64
Maximum number of bytes supported for ID3 Title/Artist/Album 60
Maximum bit rate supported VBR, 320K
HDD handling capacity (additional power adapter maybe required for
some HDD models)
FAT 16/32
USB version supported 1.1
LISTENING TO USB DEVICE
1 Toggle [SOURCE] button to select “USB” mode. If no external USB device
is connected to the front panel’s USB input, “No USB” will be displayed
in the VFD. If there are no applicable MP3/WMA les available in the
external USB, the VFD will show “USB Empty”.
2 Plug-in the external USB device to the USB input – “USB Reading” will be
blinking in the VFD and then the total number of les will displayed.
3 Press [ ] to start playback.
SELECTING DIRECTORIES OR FILES
The following are the steps on how to select a desired directory and MP3 or
WMA le at stop mode.
1 Connect the external USB device to the front panel’s USB input. Toggle
[SOURCE] button to select “USB” mode.
2 Press [FOLDER D/F ] to select desired folder. Press [ENTER].
3 Press [FILE A/S ] to select desired le number.
4 Press [ENTER] to start playback. Toggle CD 9’s [DISP] button to show
information about the current le. Refer also to the item about DISPLAY
at the FRONT PANEL section of the IDENTIFICATION OF CONTROLS page.
NOTE
 DonotdisconnecttheUSBashdriveduringplayback.Itmaycause
damage to the C 546BEE.
OPERATION
USING THE C 546BEE  USB MODE
12
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ