Operation Manual

USING THE ZR 5 REMOTE CONTROL

The ZR 5 remote control is a discrete compact remote for controlling the C 725BEE from various

rooms other than the main room. The ZR 5 remote allows full separate control of the source selection

irrespective of the main room. This means the zone input may be completely dierent audio from the

main input.

1 ON/OFF: Switch ON/OFF the Zone feature. When OFF, the active RECORD OUT/ZONE 2 Selector

LED will be extinguished.

2 SOURCE [ ] : Select the active input of the NAD C 725BEE that will be sent out to the rear

panel REC OUT/ZONE 2 output port.

3 MUTE: Temporarily switch OFF or restore the Zone Volume level.

4 VOLUME [ ] : This function is not applicable for the C 725BEE.

5 PRESET [ ] : Step up or down between stored radio presets. This control button is possible if

the selected Zone is “TUNER” and the active tuner section has stored presets.

6 The following CD Player Zone buttons can control a CD Player linked to the C 725BEE under the

following conditions

a The selected zone is “CD”.

b An active CD Player with disc loaded is connected to the CD input of the C 725BEE.

SKIP [ ] : Go to the beginning of a track/le or previous track/le.

SKIP [ ] : Go to the next track/le.

[ ] : Start playback.

IDENTIFICATION OF CONTROLS

REMOTE CONTROL

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ