CD Player Owner's Manual L55

CONNECTING TO AN AUDIO SYSTEM

Installation

NOTES

• Refer to the owner’s manual of your audio system as well.

• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before

making any connections.

• If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, move the DVD player away from the

tuner and radio.

• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise,

the speakers may be damaged by a sudden high volume sound.

• Turn off the receiver before you connect or disconnect the DVD player’s power cord. If you leave the receiver power on, the speakers may be

damaged.

WARNING

Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL AUDIO jack of this DVD player

to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers (Refer to

“Selecting Digital Audio Output” on page 37).

YOU CAN LISTEN TO THE SOUND OF AUDIO CDS AND DVD VIDEO DISCS IN STEREO

To S-VIDEO OUT

To VIDEO OUT

If the TV has an S-video

input, connect the DVD

player with the

S-video cable.

Audio System

To audio inputs of

the amplifier

Audio Cable (Supplied)

To video input (yellow)

S-video cable (not supplied)

TV or monitor with

audio video inputs

Video cable (Supplied)