Operation Manual

OVERALL SPECIFICATIONS
Continuous output power into 8 ohms and 4 ohms
(both channels driven)
>35 W (ref. rated THD, 20 Hz – 20 kHz)
Continuous output power into 8 ohms (Mono, Bridge mode) >70 W (ref. 20 Hz - 20 kHz, <0.02 % THD)
Rated THD (250 mW to rated power, CCIF IMD, DIM 100) <0.03 % (ref. 20 Hz - 20 kHz)
IHF dynamic power 55 W (8 ohms)
85 W (4 ohms)
95 W (2 ohms)
Damping factor >180 (ref. 8 ohms, 50 Hz and 1 kHz)
Input sensitivity 270 mV (ref. rated power)
Voltage gain 35 dB
Frequency response ±0.2 dB (ref. 20 Hz - 20 kHz)
- 3 dB at 3Hz and 100 kHz
Signal-to-noise ratio, A-weighted >95 dB (ref. 1 W)
>110 dB (ref. 35 W)
Minimum input signal to trigger auto sense mode >20 mV
Time to go to standby mode at no input signal (auto sense mode) 10 minutes
Rated power 270 W
Standby power <0.5 W
DIMENSION AND WEIGHT
Unit dimension (W x H x D) 483 x 105 x 323 mm
19 / x 4 / x 12 / inches
Shipping weight 8.4 kg (18.5 lbs)
NAD SHALL NOT BE HELD LIABLE FOR ANY TECHNICAL OR USER INTERFACE DISCREPANCIES IN THIS MANUAL. THE CI 940 OWNER’S MANUAL MAY BE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. CHECK OUT
WWW.NADELECTRONICS.COM FOR THE LATEST VERSION OF THE CI 940 OWNER’S MANUAL.
REFERENCE
SPECIFICATIONS
11
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ