MP3 Player Owner's Manual T514

ManualsBrandsNAD ManualsDVD PlayerNAD T514

Installation and Setup

ENGLISH FRANÇAIS

DEUTSCH

NEDERLANDS

ESPAÑOL

ITALIANO

PORTUGUÊS

SVENSKA

LOCK (PARENTAL CONTROL)

RATING

Some movies contain scenes that may not be suitable for children to

view. Many of these discs contain parental control information that

applies to the complete disc or to certain scenes on the disc. Movies

and scenes are rated from 1 to 8, depending on the country. Some

discs offer more suitable scenes as an alternative.

The parental control feature allows you to block access to scenes

below the rating you input, thereby preventing your children from

being able to view material you believe is unsuitable.

1 Select “Rating” on the LOCK menu then press .

2 To access the Rating, Password and Country Code features, you

must input the 4-digit security code you created. If you have not yet

entered a security code you are prompted to do so.

Input a 4-digit code and press ENTER. Enter it again and press ENTER

to verify. If you make a mistake before pressing ENTER, press CLEAR.

3 Select a rating from 1 to 8 using the buttons.

Rating 1-8

Rating one (1) has the most restrictions and rating eight (8) is the

least restrictive

Unlock

If you select unlock, parental control is not active and the disc plays

in full.

NOTE

If you set a rating for the player, all disc scenes with the same

rating or lower are played. Higher rated scenes are not played

unless an alternate scene is available on the disc. The alternative

must have a lower rating. If no suitable alternative is found,

playback stops. You must enter the 4-digit password or change

the rating level in order to play the disc.

4 Press ENTER to confirm your rating selection, then press SETUP to

exit the menu.

PASSWORD (SECURITY CODE)

You can enter or change password.

1 Select Password on the LOCK menu then press .

2 Follow step 2 as shown left (Rating). “Change” or “New” is

highlighted.

3 Enter the new 4-digit code, then press ENTER. Input it again to verify.

4 Press SETUP to exit the menu.

If you forget your Security Code

If you forget your security code you can clear it using the following

steps:

1 Press SETUP to display the Setup menu.

2 Input the 6-digit number “210499” and the security code is cleared.

3 Enter a new code as described above.

COUNTRY CODE

Enter the code of the country/area whose standards were used to

rate the DVD video disc, based on the list in the reference chapter.

1 Select “Country Code” on the LOCK menu then press .

2 Follow step 2 as shown in the left column (Rating).

3 Select the first character using buttons.

4 Press ENTER and select the second character using buttons.

5 Press ENTER to confirm your country code selection.

DVD-V

BEFORE OPERATION

LOCK

Rating

New

Unlock

Password

Country Code

Move

Select

T514C_NAD_English_Finalv5.1.qxd 2/24/2005 11:18 AM Page 16