DVD / CD / MP3 Player Owner's Manual T514

17
ENGLISH
FRANÇAISDEUTSCHNEDERLANDSESPAÑOL
ITALIANO
PORTUGUÊS
SVENSKA
Operation
PLAYING A DVD OR VIDEO CD
PLAYBACK SETUP
You can enter or change password.
1 Turn on the TV and select the video input source connected to the
DVD player.
2 Turn on the audio system (if applicable) and select the input source
connected to the DVD player.
3 Press OPEN/CLOSE to open the disc tray and load your chosen disc
in the tray, with the playback side down.
4 Press OPEN/CLOSE to close the tray. Playback starts automatically. If
playback does not start, press PLAY.
In some cases, the disc menu might appear instead:
Use the buttons to select the title/chapter you want to
view, then press ENTER to start.
Press TITLE or DVD MENU to return to the menu screen.
Use the number buttons to select the track you want to view and
press RETURN to return to the menu screen. Menu settings and
operating procedures may differ. Follow the instructions on the each
menu screen. You also may set PBC to Off (See “PBC” on page 15).
NOTES
If parental control is set and the disc is not within the rating settings
you must input the password. (See “Lock Menu” on page 16.)
DVDs may have a region code. Your player will not play discs that
have a region code different from your player. The region code for
this player is 2 (two).
GENERAL FEATURES
NOTES
Unless stated otherwise, all operations described use the remote
control. Some features may also be available on the Setup menu.
MOVING TO ANOTHER TITLE/GROUP
When a disc has more than one title/group, you can move to another
title/group. Press DISPLAY while playback is stopped then the
appropriate number (0-9) or use to move to another
title/group. You can play any title by inputting its number while
playback is stopped.
MOVING TO ANOTHER CHAPTER/TRACK
When a title on a disc has more than one chapter or a disc has more
than one track, you can move to another chapter/track as follows:
Press SKIP or briefly during playback to select the next
chapter/track or to return to the beginning of the current
chapter/track.
Press SKIP twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback, press DISPLAY
and press to select the chapter/track icon. Then, input the
chapter/track number or use .
SEARCH
1 Press SCAN ( or ) during playback..
2 Press SCAN ( or ) repeatedly to select the required speed.
DVD, X2, X4, X16 or X100
Video CD; X2, X4 or X8
3 To exit SEARCH mode, press PLAY.
CHANGING THE AUDIO CHANNEL
Press AUDIO repeatedly during playback to hear a different audio
channel (Stereo, Left, or Right).
VCD
VCD
DVD-V
VCD
DVD-V
DVD-V
VCD
DVD-V
OPERATION WITH DVD AND VIDEO CD
T514C_NAD_English_Finalv5.1.qxd 2/24/2005 11:18 AM Page 17