MP3 Player Owner's Manual T514

ManualsBrandsNAD ManualsDVD PlayerNAD T514

ENGLISH

FRANÇAISDEUTSCHNEDERLANDSESPAÑOL

ITALIANO

PORTUGUÊS

SVENSKA

ADDITIONAL FEATURES

LAST SCENE MEMORY

This player memorizes the last scene from the last disc that is viewed.

The last scene remains in memory even if you remove the disc from the

player or switch off the player. If you load a disc that has the scene

memorized, the scene is automatically recalled.

NOTE

This player does not memorize the scene of a disc if you switch off

the player before commencing to play the disc.

SCREEN SAVER

The screen saver appears when you leave the DVD player in Stop mode

for about five minutes. If the Screen Saver is displayed for five minutes,

the DVD Player automatically turns itself off.

VIDEO MODE SETTING

• With certain discs, the playback picture may be flickering or Dot

Crawl is shown on straight lines. That means Vertical interpolation or

De-interlace is not perfectly matched with the disc. In this case, the

picture quality may be improved by changing the video mode.

• To change the video mode, press and hold DISPLAY about 3 seconds

during disc playback. The new video mode number selected is

displayed on the TV screen. Check whether the video quality has

improved. If not, repeat the above procedure until picture quality is

improved.

• Video mode change sequence:

MODE1 → MODE2 → MODE3 → MODE1

• If you turn off the power, the video mode will be back to initial state

(MODE1).

TIP

DETAILED DESCRIPTIONS FOR VIDEO MODES

MODE1: The source material of the DVD video (film material or video

material) is determined from disc information.

MODE2: Suitable for playing film based content or video based material

recorded by the progressive scan method.

MODE3: Suitable for playing video based content with comparatively

little motion.

NOTE

The video mode setting only works when the Progressive Scan mode

is set to “On” in the Setup menu.

SYSTEM SELECT

You must select the appropriate system mode for your TV system. If NO

DISC appears in the display window, press and hold PAUSE on the front

panel for more than 5 seconds to be able to select a system

(PAL, NTSC, or AUTO).

VCD

DVD-V

ADDITIONAL INFORMATION

Operation

T514C_NAD_English_Finalv5.1.qxd 2/24/2005 11:18 AM Page 25