User manual

UNPACKING AND SETUP

Packed with your T 773 A/V Receiver you will find:

• An AM loop antenna

• A FM ribbon-wire antenna with balun

• A removable AC cable (if you wish, any IEC-standard AC cable of suitable wattage may be substituted).

• The HTR 2 remote control with 4 (four) AAA batteries.

• The ZR 2 zone remote control with 3V CR2025 battery.

• This owner’s manual.

Save the packaging

Please save the box and all of the packaging in which your T 773 arrived. Should you move or otherwise

need to transport your A/V Receiver, this is by far the safest container in which to do so. We’ve seen too

many otherwise perfect components damaged in transit for lack of a proper shipping carton, so please: Save

that box!

Choose a location that is well ventilated (with at least several inches to both sides and behind), and that will

provide a clear line of sight, within 25 feet/8 meters, between the A/V Receiver’s front panel and your

primary listening/viewing position—this will ensure reliable infrared remote control communications. The T

773 generates a modest amount of heat, but nothing that should trouble adjacent components. It is

perfectly possible to stack the T 773 atop other components, but the reverse usually should be avoided.

Nonetheless, it is generally preferable that the T 773 stand alone. It is especially important that sufficient

ventilation be provided; if you are contemplating locating the T 773 within a cabinet or other furniture,

consult your NAD audio/video specialist for advice on providing adequate airflow.

CHOOSING A LOCACHOOSING A LOCA

CHOOSING A LOCA

TIONTION

TION

WHAWHA

WHA

T’S IN THE BOXT’S IN THE BOX

T’S IN THE BOX

1 Rotate the outer frame of the antenna.

2 Insert the bottom edge of the outer frame into the groove on the stand.

3 Extend the antenna cord.

ASSEMBLING THE AM LOOP ANTENNAASSEMBLING THE AM LOOP ANTENNA

ASSEMBLING THE AM LOOP ANTENNA

CONNECTING AM ANTENNA

Insert into the groove