Operation Manual

1 At the SETUP screen, press to select Digital Audio
Output and press
2Press to select the desired output and press
SELECT/ENTER.
You can select Digital Audio Output or Sampling Frequency item by
pressing SELECT/ENTER.
DIGITAL AUDIO OUTPUT
DOLBY DIGITAL/PCM : Select “DOLBY DIGITAL/PCM” if an active
digital output is supplied to a Dolby Digital decoder, (or an amplifier or
other equipment with Dolby Digital decoder).
Stream/PCM : Select “Stream/PCM” if an active digital output is
supplied to an amplifier or other equipment with DTS decoder, Dolby
Digital decoder and MPEG decoder.
PCM : Select “PCM” if an active digital output is supplied to an
amplifier or other equipment with linear PCM only (or MD recorder or
DAT deck).
SAMPLING FREQUENCY
To change the Sample Frequency setting, first select the desired digital
audio output type as indicated above. If your A/V receiver or surround
processor is NOT capable of handling 96kHz signals, select the 48kHz
option. When this choice is made, this unit will automatically convert any
96kHz signals to a 48kHz output so that your system is capable of decoding
them. If your A/V receiver or surround processor is capable of handling
96kHz signals, select the 96kHz option. When this choice is made, this unit
will pass each type of signal through without any further processing.
21
GB
Initial Settings
Each DVD disc has a variety of audio output options. Set the player’s
Digital Audio Output according to the type of audio system you use.
SELECTING DIGITAL AUDIO OUTPUT
DISPLAY
RETURN
SELECT
ENTER
TITLE MENU
AUDIO SUBTITLE SOUNDANGLE
SETUP REPEAT RANDOM
POWER OPEN/CLOSE
A-B
ZOOM MARKER — SEARCH
1,2
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Disc Audio
DOLBY
DIGITAL
/PCM
Stream/PCM
PCM
Disc Subtitle
Disc Menu
Rating
Password
TV Aspect
Menu Language
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Disc Audio
DOLBY
DIGITAL
/PCM
Stream/PCM
PCM
96 kHz Linear PCM
DVD
PCM PCM PCM
DTS DVD DTS bit Stream DTS bit Stream DTS bit Stream
Dolby Digital DVD Dolby Digital bit
Stream
Dolby Digital bit
Stream
PCM
MPEG DVD MPEG bit Stream PCM PCM
Audio CD PCM PCM PCM
DTS Audio CD DTS bit Stream DTS bit Stream DTS bit Stream
Playback Disc
OUTPUT
Stream/PCM Dolby Digital/PCM PCM only
NOTES
• If an active digital audio output signal is supplied to a receiver or
other equipment without a corresponding digital decoding
capability, a very loud noise may be produced which could
permanently damage the speakers.
• The DTS DVD disc sound is played back only when the DVD player
is connected to a receiver with a DTS decoder.
T571 manual (GB) 19/11/01 2:15 pm Page 21