Owner`s manual
ANALOG AUDIO
The T 757 has six analog audio inputs including 7.1 input. These analog
inputs - Audio 1, Audio 2, Audio 3, Audio Front, Audio MP and 7.1 Input can
be variably assigned to each Source.
Scroll to “Analog Audio” and then press [ S ] and then [ D/F ] to select
and assign an analog audio input to the particular Source. There are three
choices - Audio, 7.1 Input or O.
When “Audio” is chosen, press [ S ] and then [ D/F ] to select and assign the
desired audio input - 1 to 3, Front and MP.
Select “7.1 Input” to choose the audio signal fed to the “7.1 Channel Input”.
If “O’ is selected, no incoming analog audio signal is selected by the
particular Source.
NOTE
An incoming digital signal present at the assigned digital input will always
take precedence over the assigned analog audio input, even if both are
present. To maintain the analog audio input for the particular Source, select
“O” at the “Digital Audio” setting of the same “Source” menu.
GAIN
Gain adjustment allows all sources to play back at the same volume level so
you don’t need to adjust the volume every time a new source is selected. It
is generally preferable to reduce the level of the loudest source rather than
making louder the softer sources.
Scroll to “Gain”, press [ S ] and then [ D/F ] to step through the desired level
from -12dB to 12dB.
DIGITAL AUDIO
To take advantage of the T 757’s high performance surround and digital
audio circuitry, it is advisable that its Digital Audio inputs are selected.
There are three types of Digital Audio input for the T 757. These are HDMI,
Optical and Coaxial digital inputs. A fourth option is “O” whereby no
incoming digital audio signal is selected by the particular Source.
The desired digital audio input for a particular Source can be selected by scrolling
to “Digital Audio”, press [ S ] and then [ D/F ] to step through the desired digital
input source. After nalizing the desired type of Digital Audio input, press [ S ] and
then [ D/F ] again to select the specic Digital Audio input.
The following are the sets of assignable Digital Audio input:
HDMI $ HDMI 1, HDMI 2, HDMI 3, HDMI 4
Optical $ Optical 1, Optical 2, Optical 3, Optical Front
Coaxial $ Coaxial 1, Coaxial 2, Coaxial 3
NOTE
An incoming digital signal present at the assigned digital input will always
take precedence over the assigned analog audio input, even if both are
present. To maintain the analog audio input for the particular Source, select
“O” at the “Digital Audio” setting of the same “Source” menu.
VIDEO
There are four types of video input a particular Source could be assigned. These
are HDMI, Component, S-Video and Video inputs. A fth option is “O” wherein
the particular Source is prompted not to select any Video input.
Navigate through the Video input selections by pressing [ S ] and then [ D/F ] to
step through the selections. The following are the sets of assignable Video input:
HDMI $ HDMI 1, HDMI 2, HDMI 3, HDMI 4
Component Video $ Component 1, Component 2, Component 3
S-Video $ S-Video 1
Video $ Video 1, Video 2, Video Front
OPERATION
USING THE T 757 SETUP MENU
20
ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ