Owner`s manual

MEASUREMENT IS THE FIRST STEP

Connect the Audyssey microphone jack into the front panel’s MP/MIC input

and the Audyssey Setup wizard will guide you through a simple step-by-

step conguration.

The sound at your main listening position is setup using the supplied Audyssey

microphone. A special test tone is sent to each speaker and the data is

memorized by the T 757. The duration of setup may take some time depending

on the number of speakers. After the measurements, Audyssey calculates the

ideal system response for your particular room and speaker setup.

If some inconsistencies or discrepancies are detected during the Audyssey

setup, the process maybe interrupted or the problem is shown in the

particular setup window. A notice screen is correspondingly displayed. After

following and undertaking the displayed instructions, re-start the Audyssey

setup again. When the measurements are nalized, Audyssey calculates the

ideal system response for your particular room and speaker setup.

NOTE

The test tone emitted during measurement is loud. This maybe

bothersome for you and may aect your other household members as

well, and even your neighbor. It is incumbent for you to decide whether

or not to stay in the area during the calibration.

It is recommended that you take full advantage of the T 757’s Audyssey

Setup feature for your speaker setup. However, if you desire to setup

your speakers manually or if you already had run Audyssey Setup but

would like to make adjustments, the following sections on Speaker

Conguration, Speaker Levels and Speaker Distance can also be followed

and implemented.

NOTE

During manual setting of your speakers, previously calibrated

Audyssey settings could be retrieved by re-adjusting back the altered

congurations as highlighted by an asterisk.

OPERATION

USING THE T 757  SETUP MENU

ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ