Owner`s manual

Speaker Setup: from the Speaker Setup menu, go to “Speaker
Conguration sub-menu and change “Subwoofer from “On to “O”:
“Front” becomes “Large”
2 With the above settings, scroll to A/V Presets from the SETUP MENU
page. Use [ S ] to access A/V Presets” menu.
3 At A/V Presets page, set “Preset: 1” to the following conditions - use
[ D/F ] to select “Yes” or “No” and press [ENTER] to conrm selection and
move on to the next setting.
While at “Save Current Setup to Preset” menu line, use [ S ] to save the
above settings to Preset 1. Below OSD will be shown, arming that the
above settings are now saved to “Preset 1”.
When you recall “Preset 1” using the remote control (for AVR 4, A/V PSET
+ “1”), the above preset values allocated at “Preset 1” (preset settings as
shown in the OSD captures at Step 1) will be recalled and eected at
the current source.
4 Now, repeat again Step 1 above but this time with the following
settings
Listening Mode: PLIIx Music
DSP Options: 0ms
OPERATION
USING THE T 757  SETUP MENU
31
ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ