Owner`s manual

PLAYING BLU-RAY 3D DISC
The T 567 can playback Blu-ray 3D discs. The following requirements must
be met to allow Blu-ray 3D disc playback.
• Your TV must be 3D-capable and has HDMI 1.4 input(s).
• Connect the T 567’s HDMI OUT to the HDMI input of your 3D-capable
TV using an HDMI cable (Type A, High Speed HDMI cable).
• Make sure that the BD-ROM title you are playing is a Blu-ray 3D disc.
• If necessary, wear 3D glasses to enjoy 3D experience.
BEFORE BLURAY 3D DISC PLAYBACK
Press [HOME] and select “Setup”. At “DISPLAY” setup menu, set “3D Mode” to
“On”. You can now start the playback of the Blu-ray 3D disc.
NOTE
Refer to your 3D-capable TV for further instructions about 3D
compatibility. There may be specic instructions to enable 3D eect.
USB MODE
The T 567 can play back MP3/WMA/PHOTO/PNG/DivX les stored in
external USB (Universal Serial bus) devices. The following are the T 567’s
capabilities with respect to USB device playability.
• Support USB Flash Drive and External HDD formatted in FAT16, FAT32 or
NTFS.
• Support USB 1.1 and USB 2.0.
• Support up to 4 partitions of the USB device.
• Digital camera and mobile phone are not supported.
• If a USB extension cable or USB HUB is used, the USB device may not be
recognized.
USB les can be accessed by selecting “Movie”, “Photo” or “Music” option
from the HOME menu.
• For example, upon selecting “Music” from HOME menu, the “Select a
Device or Server” appears. Select “USB” as the desired media and then
press [ENTER].
For details of operations on applicable le type, refer to the relevant
sections below about MP3/WMA/Photo/DivX playback.
NOTE
External HDD formatted in NTFS is read only; thus, it cannot be used for
downloading BD-Live contents.
IMPORTANT NOTICE
USB port of the T 567 cannot be connected to a PC.
PLAYINGAUDIO CD/MP3/WMA
The T 567 can play Audio CD and MP3/WMA formatted recordings on
CD-R/RW, DVD±R/RW,BD-R/RE discs or USB ash drive.
1 Load the applicable disc or connect USB containing les. Select “Music”
from the “Home” menu.
2 “Select a Device or Server” menu appears. Select “USB” or “Audio” as the
desired media and then press [ENTER].
3 The “MUSIC” menu appears at the OSD (USB mode). A list of folders,
tracks or les are shown at the OSD.
4 Use the BR 2’s [A/S/D/F] keys to navigate through the folders, tracks or
les.
5 Press [ENTER] to see the folder contents. Press [A/S/D/F] to select a
track or le.
6 Press [4] (Play) or [ENTER] to start playback.
NOTES
• Playback may start automatically if an Audio CD is loaded.
• If you are in a le list and want to return to the previous Folder list, use
the [D/F] buttons on the remote to highlight the folder and press
[ENTER].
• During playback, press [RTN] once or twice to go back to the previous
menu/page/OSD.
IMPORTANT NOTICES
• Customers should note that permission is required in order to download
MP3/WMA les and music from the Internet. NAD ELECTRONICS
INTERNATIONAL has no right to grant such permission. Permission
should always be sought from the copyright owner.
• Maximum les per disc/USB: less than 2000 (total number of les and
folders).
OPERATION
USING THE T 567  FEATURES
18
ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ