Operation Manual

ABOUT THE VISO TWO INTERNAL DVD PLAYER
The VISO TWO has exceptional playability. It has support for DVD-Video,
DVD-R/-RW/+R/+RW, DVD-A, SVCD with or without PBC (Play Back Control),
VCD, DivX, Audio CD, CD-R/-RW and including recorded MP3, copyright-
protected WMA and JPEG les.
NOTE
 YoucannotplaybackdiscsotherthanthoselistedabovesuchasCD-
ROM,CD-Extra,CD-G,photo-CD,andCD-idatadiscs.Todosomay
render the VISO TWO permanently inoperable.
REGION MANAGEMENT INFORMATION
The VISO TWO’s internal DVD Player is designed and manufactured to
respond to the Region Management Information that is recorded on a DVD
disc. If the Region number described on the DVD disc does not correspond
to the Region number shown on the back of the VISO TWO, the internal
DVD player cannot play that disc. The VFD will display “REG Err” (“Wrong
Region” in the OSD) when an incompatible region disc is loaded.
DISC LOADING AND PLAYBACK
You can open the disc tray by pressing [OPEN/CLOSE] button even if the
VISO TWO is in standby mode. The power indicator will turn from amber to
blue. Place a disc on the disc tray with the playback side down.
There are two dierent disc sizes. Place the disc in the correct guide on the
disc tray. If the disc is out of the guide, it may damage the disc and cause
the VISO TWO to malfunction. “DISC Err” appears on both the VISO TWO’s
display and the TV/monitor screen, if the disc is placed upside down (and it
is a single sided disc).
The following are important tips when loading a disc
• Do not push the disc tray while it is moving. Doing so may cause the
VISO TWO to malfunction
• Do not push up the disc tray or put any objects other than discs on the
disc tray. Doing so may cause the VISO TWO to malfunction.
• Keep your ngers well clear of the disc tray as it is closing. Be especially
careful with children’s ngers around the closing disc tray, as there is a
risk of personal injury.
Press [PLAY/PAUSE], the disc tray is automatically closed and playback
begins. Press the HTR 6’s navigation buttons and then press [ENTER] or press
the numeric button(s) to select the desired track (CD). Play of the selected
item now begins (Depending on the DVD disc or other disc media, some
operations may be dierent or restricted. Refer to the jacket or case of the
disc you are playing).
Press the HTR 6’s [STOP] key twice during playback to display an audio CD’s
total number of tracks and total playback time in the VFD.
After playing back all of the chapters in the title, VISO TWO’s DVD player
automatically stops and returns to the menu screen.
NOTES
• DonotmovetheVISOTWOduringplayback.Doingsomaydamagethe
disc and the VISO TWO.
• TheHTR6controlkeys[ ],[ ],[ ],[ / / / ]and[ ]arenot
punch-throughfunctionkeys.Tousethemfordiscplaybackpurposes,make
surethatHTR6’sDEVICESELECTORissetto“DVD”.
Depending on the media, the following are other basic features of the
VISO TWO’s internal DVD player. Make sure that you select “DVD” at the Device
Selector selection of the HTR 6 before you proceed with the specic function.
TITLE AND MENU BUTTONS
Both these buttons are only found on the HTR 6. The [TITLE] and [MENU]
buttons are used to display via OSD, the title headings and menus of the
DVD and other applicable media. Some movie discs may contain two or
more titles. If the disc has a title menu recorded on it, the [TITLE] button can
be used to select the movie title. (The details of operation dier depending
on the disc used.)
Press [TITLE] and a list of the titles on the disc are displayed. Depending
on the disc, pressing [TITLE] again will resume play from the scene when
[TITLE] was rst pressed.
Press [ENTER], [PLAY] or the numeric button(s) to select desired title; the
selected title now starts playing.
Some DVDs have unique menu structures called DVD menus. For example,
DVDs programmed with complex contents provide guide menus, and
those recorded with various languages provide menus for audio and
subtitle language.
Press [MENU] during play; the DVD menu available on the disc is now
displayed. Pressing [MENU] again resumes play from the scene when MENU
was rst pressed.
RANDOM
Press the HTR 6’s RANDOM key during playback and “Random” briey appears
on the upper line of the VFD. “Ran” will then be displayed in VFD alongside the
track number and playback time. Press [ / ] for random playback of
audio tracks. Press RANDOM again to return to normal playback.
For iPod songs, “Ran Song” or “Ran Album” will be displayed in the VFD as
applicable. “Ran Song” allows random playback of songs within an album or
playlist. On the other hand, “Ran Album” randomly plays all the songs in an
album. Afterwards, another album is randomly selected and also randomly
plays all the songs in this album.
OPERATION
USING VISO TWO  FEATURES
19
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ