Bluetooth Barcode Scanner Manual Specification： Frequency：Bluetooth Distance：10m / 32ft Package include: 1 X bluetooth scanner 1 Xgray charging cable (only for charging) 1 X bluetooth adapter (only used for computer that do not have Bluetooth capability） 1 X CSR 4.0 bluetooth driver (only used for computer that do not equipped with Bluetooth driver） Please charge the scanner first at least for 1hour when you get it. When it is out of power,the buzzer wil rang “DI DI DI” .
/ Pairing Guidance with mac OS Step 1. Scan the following barcode ,set the scanner to UART mode. ①UART 9600,NO,8,1 Step 2. Scan the ‘Match’ bar code,till blue light and red light flashing at the same time, which means the scanner is under matching mode. Match Step 3. run "Bluetooth Setup Assistant" on mac Step 4. Wait a few seconds, the red light will be off and the blue light keep lighting, and the buzzer range “di di”, this means Bluetooth pairing successfully. Step 5.
Step 5 At the "Select Device Type" dialog, choose "Other Device" and click "Continue" Step 7 From the next dialog,select “Use a specific passkey” and click OK. Step 8 Enter the passkey for the device, and click "Continue". Step 6 at the "Bluetooth Device Set Up" dialog, choose the device, and click "Continue". Step 9 To test whether the barcode can be uploaded the red light will be off and the blue light keep lighting, and the buzzer range “di di”, this means Bluetooth pairing successfully.
3 / Pairing Guidance with Bluetooth-enable Laptop Step 3. Then click ‘ Add a Device’, same screen appears. Step 1. Enabling Bluetooth on your Laptop,Bluetooth device icon appears on the system tray. Step 2. Double-click the Bluetooth icon, Bluetooth Devices window screen appears, Step 4 Scan the following barcode ,set the scanner to UART mode. ①UART 9600，NO，8，1 (or right click the Bluetooth device icon), Step 5.
Then windows keep finding new devices till following screen appears System begin to ‘Connecting with this device’, Step 5. Click to choose the ‘General Bluetooth HID Barcode Scanner’, and click ‘ Next’, Wait a few seconds, till ‘This device has been successfully added to this computer’ appears, and then click ‘Close’.
Step 6. To test whether the barcode can be uploaded After pairing successfully, the red light will be off and the blue light keep lighting, and the scanner rang “ di di.” Then run Text,WORD or EXCEL,put the cursor in, and then scan any barcode to see if the barcode can be uploaded to the place where the cussor is in . Choose the language 4/ Pairing Guidance with computer without Bluetooth function You need to install the bluetooth driver first. Step 1.
Step 2. Insert the Bluetooth adapter to PC’s USB port, Bluetooth device icon appears on the Then click ‘ Add a Device’ and choose the the “keyboard, the screen appears. system tray. Step 3. Double-click the Bluetooth icon, Bluetooth Devices window screen appears, Step 4 Scan the following barcode ,set the scanner to UART mode. ①UART 9600，NO，8，1 (or right click the Bluetooth device icon), Step 5.
Step 5. Click to choose the ‘General Bluetooth HID Barcode Scanner’, and click ‘Next’, System begin to ‘Connecting with this device’, Wait a few seconds, till ‘This device has been successfully added to this computer’ appears, and then click ‘Close’.
Step 6. To test whether the barcode can be uploaded After pairing successfully, the red light will be off and the blue light keep lighting, and the scanner rang “ di di.” Then run Text,WORD or EXCEL,put the cursor in, and then scan any barcode to see if the barcode can be uploaded to the place where the cussor is in .
5 / select data upload mode **Scan the following barcode to show total number of stored barcode a)scan the following barcode carcode to set the scanner to instant upload mode Show total storage Instant Upload Mode **Scan the following barcode to clear stored bar code In instant upload mode,when you scan a barcode within the Bluetooth transmission range(10m),the scanner will synchronously upload data to the text document you have opened.
7/ select Bluetooth upload speed Upload speed -low 1/ select one of following barcode to Add ID as an identifier a）Add ID before the barcode Upload speed fast (default) 8/ select Bluetooth mode HID mode (default) b) Add ID after the barcode c) Off ID 2/ Scan the following barcode to add Carriage Return after every scaning (Factory default settings) SPP mode 9/ scan the following to show or hide IOSkeyboard (only use for IOS system) Add CR 3/ Scan the following barcode to add a Tab key after every sc
5/ to disable suffix REVERSE (ON) REVERSE (OFF) disable suffix 6/ Scan the following barcode to ON or OFF the check digit EAN8 Check Digit -- ON CODE11(ON) CODE11(OFF) CODE39(ON) CODE39(OFF) EAN8 Check Digit-OFF FULL ASCLL(OFF) EAN13 Check Digit -- ON EAN13 Check Digit-OFF CODE93(ON) UPCE Check Digit -ON UPCA Check Digit-OFF UPCA Check Digit -OFF 7 / Scan the following barcode to ON or OFF the the corresponding decoding capability CODE93(OFF) CODE128(ON) CODE128(OFF) CODABAR(ON) UPCA Chec
Question 1 when the light at the top of the scanner is green, and the buzzer rang a -INTERLEAVED 2OF5(ON) fast”DI-DI-DI”, it indicates that the scanner does not enter Bluetooth pairing INTERLEAVED 2OF5(OFF) mode. Solution Please refer to pairing guidance 1 、2、3、4 INDUSTRIAL 2OF5(ON) INDUSTRIAL 2OF5(OFF) Question 2 when the red indicator light goes out ,the blue light and the green light is on. MSI(ON) MSI(OFF) it meas that the scanner is successfully paired with your device.
