Bluetooth Barcode Scanner Manual Package list 1 X bluetooth scanner 1 Xgray charging cable (only for charging) 1 X bluetooth adapter (only used for computer that do not have Bluetooth capability) 1 X CSR 4.0 bluetooth driver (only used for computer that do not equipped with Bluetooth driver Charging Please ensure that the scanner has enough power before start using it. If the scanner is run out of battery,the buzzer may ring three “drop drop drop”or the laser will become only a dot or or it has no laser.
Step 4. Wait a few seconds, the red light will be off and the blue light keep lighting, and Step 6. Scan the following code to Active or Hide the Input Method (only use for ipad / the buzzer range “di di”, this means Bluetooth pairing successfully. iphone) Double click button to Show and hide IOSkeyboard double click Power key quickly, it will active the soft keypad. double click Power key quickly again, the soft keypad will hide. It is shown as following: Step 5.
2 / Pairing Guidance with Bluetooth-enable android phone Note： Not connected status: Only the green indicator light is on Under matching mode:The green indicator light is on ,the red light and the blue light is flashing. Connected status:the buzzer range “di di”The red light goes out, the green light and blue light is on. Step 1. Press the button to wake the scanner,the scanner will beep fast “di di di” and the green light will turn on. Step 2.
Step 4. Wait a few seconds, the red light will be off and the blue light keep lighting, and the buzzer range “di di”, this means Bluetooth pairing successfully. Step 6. Active or Hide the Input Method （for android phone） 1) Install the CILICO Bluetooth barcode input method”APP (Please contact us at natamo@126.com for the APP) and set up the Input Method Step 1). Tap the “Continue” Step 5. Step 2).
Step 3). Tap the “open” Step 4).Tap the “switch input method” 9 Step 5). Tap “set up input method” Step 6). Click “Cilico English bletooth...
2)Exit and reopen the app Step 1).,tap the “switch input method” 11 Step 2).Select“Cilico English ....” Step 3) .
3) After the above settings, click on any text input box, Android device can automatically pop up the virtual keyboard 3/ Pairing Guidance with mac OS Step 1. Press the button to wake the scanner,the scanner will beep fast “di di di” and the green light will turn on. Step 2. Scan the following‘Match’ bar code,till blue light and red light flashing at the same time, which means the scanner is under matching mode. Match Step 3.
Step 5 At the "Select Device Type" dialog, choose "Other Device" and click "Continue" Step 7 From the next dialog,choose the no passkey, Step 8 To test whether the barcode can be uploaded the red light will be off and the blue light keep lighting, and the buzzer range “di di”, this means Bluetooth pairing successfully. Then run Text,WORD or EXCEL,put the cursor in, and then scan any barcode to see if the barcode can be uploaded to the place where the cussor is in .
4 / Pairing Guidance with Bluetooth-enable Laptop (or right click the Bluetooth device icon), Step 1. Enabling Bluetooth on your Laptop,Bluetooth device icon appears on the system tray. Step 3. Then click‘ Add a Device’, the screen appears. Step 2. Double-click the Bluetooth icon, Bluetooth Devices window screen appears, Step 4. Scan the‘Match’bar code,till blue light and red light flashing at the same time, which means the scanner is under matching mode.
System begin to ‘Connecting with this device’, Then windows keep finding new devices till following screen appears Step 5. Click to choose the ‘General Bluetooth HID Barcode Scanner’, and click ‘ Next’, 19 Wait a few seconds, till ‘This device has been successfully added to this computer’ appears, and then click ‘Close’.
Step 6. Totest whether the barcode can be uploaded After pairing successfully, the red light will be off and the blue light keep lighting, and the scanner rang “ di di.” Then run Text,WORD or EXCEL,put the cursor in, and then scan any barcode to see if the barcode can be uploaded to the place where the cussor is in . Choose the language 5/ Pairing Guidance with computer without Bluetooth function You need to install the bluetooth driver first. Step 1.
Step 2. Insert the Bluetooth adapter to PC’s USB port, Bluetooth device icon appears Then click ‘ Add a Device’ and choose the the “keyboard, the screen appears. on the system tray. Step 3. Double-click the Bluetooth icon, Bluetooth Devices window screen appears, Step 4. Scan the‘Match’bar code,till blue light and red light flashing at the same time, which means the scanner is under matching mode.
Then windows keep finding new devices till following screen appears Step 5. Click to choose the ‘ General Bluetooth HID Barcode Scanner’ , and click ‘Next’, 25 System begin to ‘Connecting with this device’, Wait a few seconds, till ‘This device has been successfully added to this computer’ appears, and then click ‘Close’.
General settings 1/ Scan the follow barcode to restore factory default settings, 3/ Scan one of the following barcode to select the voice mode a )Open the buzzer b) Close the buzzer Restore defaults After restoring the default settings,you need to set the UART module,scan the following barcode 4/ to set the sleep time First,Scan the following barcode to enter into sleep time setting, Into sleep time setting ①UART 9600，NO，8，1 2/ Scan one of Second,scan one of the following barcode to set the time inte
5 / select data upload mode In storage mode, you could scan and store any barcode inside the scanner, and a)scan the following barcode carcode to set the scanner to instant upload mode uploaded the data to your device when you need it . **Just scan the following barcode to upload data Instant Upload Mode In instant upload mode,when you scan a barcode within the Bluetooth transmission range(10m),the scanner will synchronously upload data to the text document you have Upload data opened.
7/ select Bluetooth mode default settings) HID mode (default) SPP mode 8/ scan the following to shut down the scanner Add CR 3/ Scan the following barcode to add a Tab key after every scanning Add Tab Shut down 4/ Scan the following barcode to add Carriage Return and skip after every scanning Barcode Programming 1/ select one of following barcode to Add ID as an identifier Add CR+Skip 5/ to disable suffix,please scan “Restore defaults” “①UART 9600，NO，8，1 a）Add ID before the barcode b) ” an then
6/ Scan the following barcode to ON or OFF the check digit EAN8 Check Digit -- ON 7 / Scan the following barcode to ON or OFF the corresponding decoding capability EAN8 Check Digit-OFF EAN13 Check Digit -- ON EAN13 Check Digit-OFF UPCE Check Digit -ON UPCA Check Digit-OFF UPCA Check Digit -ON UPCA Check Digit -OFF Upce to Upca -ON REVERSE (ON) REVERSE (OFF) CODE11(ON) CODE11(OFF) CODE39(ON) CODE39(OFF) FULL ASCLL(OFF) FULL ASCLL(ON) CODE93(ON) CODE93(OFF) Upce to Upca--OFF CODE128(ON) C
8/ LanguageSetting Supports 25 national language -INTERLEAVED 2OF5(ON) INTERLEAVED 2OF5(OFF) INDUSTRIAL 2OF5(ON) UNITED STATES LATIN AMERICA INDUSTRIAL 2OF5(OFF) FRANCE MSI(ON) BELGIUM MSI(OFF) GERMANY UPCA(ON) NETHERLANDS UPCA(OFF) UPCE(ON) BRAZIL HUNGARY SPAIN DENMARK ITALY UNITED KINGDOM UPCE(OFF) EAN13(ON) EAN13(OFF) EAN8(ON) EAN8(OFF) 35 36
SERBIA/YUGOSLAVIA SLOVENIA CANADIAN-FRENCH CROATIA FINLAND SWITZERLAND (FRENCH) CZECHOSLOVAKIA (CZECH) PORTUGAL SWITZERLAND (GERMAN) CZECHOSLOVAKIA (SLOVAK) NORWAY POLAND SWEDEN UNIVERSAL 37 38
