User Manual

Connection Mode Setting

I.Wired Mode:

1. Connect the scanner to your computer Via USB cable

2. Press the scanner's blue button to start the scanner.

3. Scan the following code to convert the scanner to wired mode

Wired Mode

4.Run Microsoft Word or notepad on computer,put the cursor in the

field. when barcode is scaned, the scanner inputs the barcode into the

location of the cursor.

II.Bluetooth Mode:

Bluetooth Mode

Match

Note:

1.Be sure the scanner is set to Bluetooth Mode.

2.The Scanner name："General Bluetooth HID Barcode".

3.when you need to switch devices, you have to delete the pairing and

re-establish connection between the scanner and the device.

Pairing with Android 、IOS device.

1. Press the button, the buzzer sounds twice, the green light is on and the

scanner starts.