User Manual

6
supports up to 5000 barcodes .You could upload the data to computer
when you need it.
An operation in storage mode is strongly recommended under the
following scenarios:
1) During the scanning process, the device often leaves the Bluetooth
signal range;
2) Due to a high quantity of blocking objects, the Bluetooth signal’s
stability can’t be ensured.
**To set the scanner to storage mode ,please scan the following
barcode
Storage mode
** Scan the following barcode to upload the stored data
Upload data
**Scan the following barcode to show total number of stored barcode
Show total storage
**Scan the following barcode to clear all the stored barcode
Clear data
Scanning Mode setting
Key trigger mode: Red light is on when pressing the button
Continuous scanning mode: Red light always on when the scanner is
electrified. The scanner reads barcode without pressing any buttons.
Auto-induction mode：Red light is on when a barcode appear in front
of the scanning window and then the goes out after the barcode is read