Bur3003 Barcode Scanner User Manual Service Mailbox server@nadamoo.cn nadamoo@126.com V51.
Contents Technical Parameter Packing list Battery & Charging Set Up Step FAQs Troubleshooting Optional Function settings 3 4 4 5 6 8 9 1. Pairing Mode Setting 9 2. Upload Mode Setting 12 3. Scanning Mode Setting 15 4. Duplicated Barcode Detection 15 5. Beep Setting 16 6. Interface Setting 17 7. Identity Barcode Type 18 8. Keyboard Language Setting 19 9. Case Sensitivity Setting 21 10. Battery Remaining 21 11. Power Off Settings 22 12. End Character Setting 22 13.
In order to correctly use the bar code scanner, please read the instruction carefully and do not arbitrarily scan the settings code otherwise some settings may not be available temporarily. Please keep this instruction for reference in the future. If you have any question or concern about the operation of the scanner, please contact us at following Email: server@nadamoo.cn nadamoo@126.
Technical Parameter Mfr P/N Bur3003 Serial Radio Frequency 436.3MHz Wireless Wireless Range Indoor 100m, outdoor 400m Memory 100000 barcodes Battery capacity 2600mAh Charging power DC 5V 400mA Standby current 18uA-5mA Working current 15-40mA Printing Contract >25% Light source 650nm LED LED life 12000 hours Button life 8000,000 times Resolution 3.
Packing list •Barcode scanner*1 •USB Cable*1 •Instruction Manual*1 •USB Wireless receiver *1 Battery & Charging The scanner is powered by 2600mAh chargeable battery. Please ensure that the scanner has enough power before use. Low battery level indication The red indicator light flashes three time, it indicates that the power is less than 30%. Please charge the scanner as soon as possible. The red light flashes three times and then cut down automatically, it indicates that the power is less than 20%.
Wireless Mode Set Up Step The scanner has been paired with the receiver, and set up already. Step 1, Power on the scanner by pressing the button. The buzzer has a triple beeps, the blue light on the top of scanner will be on. Step 2. Insert the USB receiver into the USB port of computer. The USB receiver’s blue light will be on. Step 3. Open notepad on computer and move cursor to the blank where scanning output should be placed. Scanning results can be displayed on computer then.
FAQs: Q1. If i scan a product barcode, will it include the name of the product in the file automatically? Answer： The scanner works like a keyboard. The scanner does not interpret what the barcode is, it just "types" out a string of alphabet numeric characters that the barcode represents. it's up to the database software you are using to interpret what that string of characters means.
If that is not your case, please send us a clear picture of the barcode and the result you get, our customer service will help you to solve the problem. Q3. Some barcodes can not be read, why? Answer： A. Incomplete and unclear barcodes might not be read. B. It is possible that the setting is off by default for some barcode types which are not commonly used. You need to activate a specific barcode type to get it working.
Troubleshooting Problem Possible Reason Solution Insert the USB receiver into the PC‘s USB port, the receiver’s light does not light up or the blue light is flashing. 1. The PC’s USB port is out of condition. Connect the USB receiver to another USB port. 2. The USB receiver is out of condition. Contact nadamoo@126.com for the replacement. The battery run out. Connect the scanner to PC’s USB port for charging via USB cable Power on the scanner, the scanner has no reaction.
Optional Function settings Settings of the barcode scanner can be changed by scanning the setup barcodes included in this manual. 1. Pairing Mode Setting 1.1 One scanner to one USB receiver：One scanner only transmits barcode to one USB receiver. Pairing operation: Plug the USB receiver into your computer ,scan the code "match " to pair the scanner with the USB receiver.
Several units can work independently with different computers in the same area. They won't interface with each other during work. If you want to use them on multiple computers, each with own scanner and receiver. Please set up barcode scanners follow below steps. （1）Plug the USB receiver A into PC’s USB port （2）Scan the code “match”using scanner A to pair the scanner A with the receiver A.
1.2. Max.32 Scanner - to - One USB receiver Multiple scanners transmit barcode to one USB receiver. One USB receiver can connect to 32 scanners at most. Pairing operation: （1）Plug the USB receiver A into PC‘s USB port （2）Scan the code “match”using scanner A to pair the scanner A with the receiver A （3）Unplug the USB receiver A and plug it to PC‘s USB port again （4）Scan the code “match”using scanner B to pair the scanner B with the receiver A ...
2. Upload Mode Setting 2.1. Instant Upload Mode ： Read barcodes and upload it straight to the file you have opened. ** To set the scanner to upload barcode instantly, scan the following code: Instant upload mode Scanning indication: (1) The blue led 3 flashes once and the buzzer emits a sound like "DI" when the barcode is uploaded successfully. (2)The blue led 3 flashes once and the buzzer emits a sound like a slow "DI---en" when the barcode can not be uploaded.
2.2. Storage Mode： Read barcodes and store the barcodes in scanner’s own memory. You can upload the data to computer in batches when you need them. Internal storage saves up to 100,000 barcodes. Note： In storage mode, the barcode will be stored in the scanner and will not come up on your computer instantly. The barcode comes up on your computer only when you scan the settings code "upload data" ** To convert scanner from "instant upload mode" to "storage mode", scan the following barcode “Storage mode“.
the barcode can not be saved in the built-in memory of the scanner. The space of memory is not enough and cannot store any more barcodes. Please upload the saved barcode by scanning the code "Upload Data" and then clear the saved barcode by scanning code "zero clearing". Note 1: In storage mode, the transmission speed between every barcode can be changed by scanining the following code. The higher the value, the slower the speed is.
Manual trigger mode (default) 3.2. Continuous Scanning Mode There’s no need to click the trigger in this mode. The red laser of the scanner will be on all the time. ** Scan the following codes to set the scanner to Continuous Scanning Mode. Continuous Scanning Mode 4.
Same Barcode Detection-2 seconds Same Barcode Detection-3 seconds Same Barcode Detection-4 seconds Same Barcode Detection-5 seconds Same Barcode Detection-10 seconds Same Barcode Detection-15 seconds Same Barcode Detection-Off Same Barcode Detection-25 seconds 5. Beep Setting **Scan one of the following barcodes to adjust the size of the decoding buzzer and startup sound. Low volume Medium volume High volume (default） Beep-Off 6. Interface Setting 6.1.
actions performed by the human. The most common example of a "host" is a PC. The "device" is the entity that directly interacts with a human, such as a keyboard or mouse. ** To set the scanner as a keyboard to enter the barcode , please unplug the USB receiver and plug it in again, and then read the following code “USB_HID” USB_HID 6.2. USB virtual COM mode In USB virtual COM mode, the scanner needs to work with driver and serial software.
will be a character BEFORE the barcode you scanned, and this character states your Barcode Type. After that, if you don't need this prefix any more, please scan the code "Add ID front-Off (default)" to hide it.
8. Keyboard Language Setting The scanner support 25 international keyboards: You are suggested to set the keyboard type of the scanner to be in agreement with that in real use by scanning the correspondent barcode listed below.
CROATIA LATIN AMERICA SWITZERLAND (FRENCH) CZECHOSLOVAKIA (CZECH) NETHERLANDS SWITZERLAND (GERMAN) CZECHOSLOVAKIA (SLOVAK) NORWAY UNITED KINGDOM DENMARK UNIVERSAL POLAND FINLAND PORTUGAL 20
9. Case Sensitivity Setting The scanner can change all the letter cases of barcode into uppercase or lowercase. Letter case of barcodes can be altered through scanning correspondent bar code below. Note: Please deactivate caps lock on keyboard first. All Capital All lowercase Swap Capital/ lowercase Cancel capital/lowercase settings 10. Battery Level To know how much electricity remains, put the cursor in the blank and then scan the following barcode.
11. Power Off Settings The scanner will be powered off if there is no operation on it over 2 minutes. Short press on the trigger can wake it up. Scan one of the following barcode to set the time interval,when it's idle exceeding the time interval you set,the scanner will be power off. 20s Automatic power off 50s Automatic power off 5mins Automatic power off 30mins Automatic power off Power off Never power off 12.
13. Barcode Types Able/Disable The code ending with word "*" is the default settings.
UPCE to UPCA-On UPCE to UPCA-Off* EAN13 EAN13-On* EAN13-Off Show EAN13 check digit* Hide EAN13 check digit EAN13 to ISBN-On EAN13 to ISBN - Off* EAN13 to ISSN - On EAN13 to ISSN - Off* EAN8 EAN8 - On* EAN8-Off Show EAN8 check digit* Hide EAN8 check digit UPC/EAN Extra code UPC/EAN extra code-On UPC/EAN extra code-Off* 24
Code39 CODABAR Code39-On* CODABAR-On* Code39-Off CODABAR-Off Show CODABAR start/stop digit Code39 FullASCII-On Hide CODABAR start/stop digit* Code39FullSCII-Off* Show Code39 start/stop digit Hide Code39 start/stop digit* Code32 Code32- On Code32-Off* Show Code32 check digit Hide Code32 check digit* Code128 Code128-On* Code128-Off Code93 Code93-On Code93-Off* Code11 Code11-On Code11-Off* 25
Industrial 2 of 5 Industrial 2 of 5 -On* Industrial 2 of 5 -Off Interleaved 2 of 5 Interleaved 2 of 5 -On* Interleaved 2 of 5 -Off MSI MSI-On MSI-Off* GS1-On GS1-Off* 14. Insert and delete character The barcode scanners permit special characters to be added at the beginning (prefix) or end (suffix) of the scanned barcode. The character also can be deleted. First step： Scan one of the following setup code to choose the event.
Insert character Delete character Second step：Scan one of the following setup code to choose the barcode type.
China post GS1D GS1L GS1E Code32 Note：if you do not choose the barcode type, the setting will take effect for all barcode type by default. Third step : Scan one of the following setup code to choose the data group.
Note 1： if you do not choose the data group, the scanner will take “Data group 1” as default setting. Note 2: The data group is used to distinguish between different setting events. it work on the following circumstances: 1). Differentiating the setting for different barcode types 2). Differentiating the setting for different position Different events can take effect at the same time. Example 1 : If you want to put “A” before the Code39 type barcode, put "B" before the Code128 type barcode .
Fourth steps ： Scan one of the following setup code to choose the position Before barcode After barcode Fifth steps ：Choose the character you want to add or the digit you want to delete. Character table please refer to ASCIl code table on page 34. Note 1： Ten characters can be added or deleted at most. Note 2： For the character deleting event, below is the corresponding deleting characters table.
010 LF Ten characters Sixth steps： Scan the below code to save the setting Save setting To remove the insert setting，scan the following code in order Insert character Clear setting To remove the insert setting，scan the following code in order Delete character Clear setting 31
32
33
34
35
36
37
FCC Caution. a、§ 15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. b、§ 15.21 Changes or modification warning.
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
