OWNER’S MANUAL ENSEMBLE PA 4180 Portable Stereo Sound System
ENSEMBLE PA 4180 Portable Stereo Sound System Congratulations on your choice of a portable sound system — you have purchased one of the finest portable sound systems on the market today. This unit was developed using the expertise of professional sound engineers and working musicians. You will find that your new NADY AUDIO portable sound systems has superior performance and greater flexibility than any other portable sound systems in its price range.
WARNING An equilateral triangle enclosing a lightening flash/arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure which may be of sufficient magnitude to constitute a risk of electric shock. ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR An equilateral triangle enclosing an exclamation point is intended to alert the user to the presence of important operating and service instructions in the literature enclosed with this unit.
INSTALLATION portable sound systems, or any situation in which the AC power is in question, it is wise to confirm the voltage and use the appropriate power supply unit before connecting it to power sources. To ensure years of enjoyment from your NADY AUDIO Ensemble PA-4180, please read and understand this manual thoroughly before using the unit. 1. INSPECTION Europe (except UK): 230V, 50Hz UK and Australia: 240V, 50Hz USA and Canada: 120V, 60 Hz For other areas, please check with local authorities.
FRONT PANEL CONTROLS & CONNECTIONS (6) PAN CONTROL The channel Pan positions the output of the channel in the stereo field of the main mix. Its constant-power design ensures there are no level discrepancies whether a signal is hard-panned, center-stage, or somewhere in-between. FRONT PANEL (1) (2) (3) (4) (5) (6) (7) (8) (9) Note: 1 through 9 below are referenced to Channel 1. The other 3 Channels are identical.
FRONT PANEL CONTROLS & CONNECTIONS (12) (20) (16) (22) (13) (17) (21) (14) (18) (15) (19) (20) EFFECT LOOP SEND This line level output can be connected to external recorders, amplifiers, or effects processors. The signal is a mix of the channel inputs determined by each Channel EFF SEND control. (12) MASTER - HIGH CONTROL The control has a shelving response giving 15dB of boost or cut at 12KHz.
REAR PANEL CONTROLS & CONNECTIONS (26) POWER CONNECTOR WITH FUSE HOLDER This standard IEC power cord receptacle is used to connect the AC power to your unit. It features a built-in fuse holder for a 5X20mm, (4A/250V for 115VAC, and 2A/250V for 230VAC operation) fast-blow fuse. If the fuse continuously blows, shut off the unit and have it serviced by qualified service personnel. REAR PANEL (24) POWER SWITCH Turns the unit ON or OFF. Always turn level controls down before turning on the unit.
SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411, or e-mail at service@nady.com. (International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product. DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN BE DANGEROUS AND WILL ALSO VOID THE WARRANTY. NADY SYSTEMS, INC.
