Owner’s Manual DKW-3 GT Wireless VHF Instrument System
Contents Introduction.............................................................................................................................. 2 System Features...................................................................................................................... 2 Operation.................................................................................................................................. 3 Specifications......................................................................
Operation Receiver 1. Plug the AC/DC adapter (provided) into the 9VDC INPUT JACK (3) on the back of the receiver. Then plug the power supply into an AC outlet. Switch the POWER (1) to the “On” position. The POWER ON LED (2) will now light and the receiver is operational. 2. Rotate and extend ANTENNA (4) fully, angled at 60° position as shown. 3. The 1/4” AUDIO OUTPUT JACK (5) provides a fixed, unbalanced MIC level audio output for connection to your mixer with the 1/4” to 1/4” cord supplied.
WGT Bodypack Transmitter 1. Snap open the BATTERY COMPARTMENT (7) and insert a fresh 9V BATTERY (8), observing the correct polarity. Close the compartment. The WGT is provided with a 3.5 mm LOCKING JACK (9) for connecting the INSTRUMENT CABLE (10). To secure the connection, turn the metal slip ring on the plug clockwise to thread it on to the jack. To unplug, reverse the process. Slip the transmitter into a pocket or clip on to your clothes or instrument strap.
13 9 12 11 10 7 Opening Battery Compartment 8 5
Specifications Overall System Performance Frequency Response Dynamic Range Total Harmonic Distortion RF Carrier Frequency Range Frequency Stability Modulation Operating Range 80-14,000 Hz, +/-3dB 95dB <0.7% 170-216 MHz +/- 0.005%, crystal controlled FM (F3E), +/-15KHz max. 150 ft. typical—up to 300+ ft. line-of-sight WGT Transmitter Audio Inputs Controls LED Indicator RF Power Out Harmonic & Spurious Emissions Battery Battery Life Dimensions Weight (w/o battery) 3.
90-Days Limited Warranty Nady Systems, Inc. warrants to the original consumer purchaser (U.S.A. only) that the unit is free from any defects in material or workmanship for a period of 90 days from the date of original retail purchase. If any such defect is discovered within the warranty period, Nady Systems, Inc. will repair or replace the unit free of charge, subject to verification of the defect or malfunction upon return to Nady Systems.
6701 Shellmound Street | Emeryville, CA USA 94608 T 510.652.2411 | F 510.652.5075 | www.nady.
