RACK GEAR HPA-4 4 CHANNEL HEADPHONE/AMPLIFIER/LINE DISTRIBUTOR
HPA-4 4 CHANNEL HEADPHONE/AMPLIFIER/LINE DISTRIBUTOR Congratulations on your choice of headphone/amplifier/line distributor — you have purchased one of the finest stereo headphone/amplifier/line distributors on the market today. This unit was developed using the expertise of professional sound engineers and working musicians. You will find that your new NADY AUDIO HPA-4 has superior performance and greater flexibility than any other headphone/ amplifier/line distributors in its price range.
WARNING An equilateral triangle enclosing a lightening flash/arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure which may be of sufficient magnitude to constitute a risk of electric shock. ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR An equilateral triangle enclosing an exclamation point is intended to alert the user to the presence of important operating and service instructions in the literature enclosed with this unit.
INSTALLATION To ensure years of enjoyment from your NADY AUDIO HPA-4, please read and understand this manual thoroughly before using the unit. INSPECTION Your HPA-4 was carefully packed at the factory in packaging designed to protect the units in shipment. Before installing and using your unit, carefully examine the packaging and all contents for any signs of physical damage that may have occurred in transit. (Note: Nady Systems is not responsible for shipping damage.
FRONT & REAR CONNECTIONS (5) (4) (6) FRONT PANEL (1) (2) REAR PANEL (8) (9) (7) (3) FRONT PANEL REAR PANEL (1) STEREO HEADPHONE OUTPUTS Four stereo 1/4” output jacks for connecting four stereo headphones (2) DIRECT LINE DISTRIBUTION OUTPUTS Four stereo 1/4” line level output jacks for use for line distribution (3) AUDIO INPUTS Four stereo-pair balanced, line level 1/4” TRS jacks for 4 stereo (L & R) input signals.
APPLICATIONS USING THE HPA-4 AS A HEADPHONE AMPLIFIER Connect a stereo (L & R) program source (2 x 1/4” plugs) to the rear of the HPA-4 using one of the available 4 x stereo INPUT (3) pairs on the rear panel. Connect a set of headphones using a stereo 1/4” cable to any of the HEADPHONE OUTPUTS (1) on the front panel of the HPA-4. Select the source signal from the rotary SELECTOR (4) switch for the channel in use. Set to an appropriate level for monitoring.
NOTES 7
SERVICE FOR YOUR NADY AUDIO PRODUCT (U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411, or e-mail at service@nady.com. (International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product. DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN BE DANGEROUS AND WILL ALSO VOID THE WARRANTY. NADY SYSTEMS, INC.
