PSS-150 Portable Sound System Owner’s Manual
Contents Features 2 Warning 3 Installation 4 Inspection 4 Setup 4 Front Panel Controls & Connections 5 �ear Panel Controls & Connections 7 Specifications 7 Congratulations on your choice of a portable sound system — you have purchased one of the finest portable sound systems on the market today. This unit was developed using the expertise of professional sound engineers and working musicians.
Warning 1. When using this electronic device, basic precautions should always be taken, including the following: �ead all instructions before using the product. 2. Do not use this product near water (e.g., near a bathtub, washbowl, kitchen sink, in a wet basement, or near a swimming pool, etc.). 3. This product should be used only with a cart or stand that will keep it level and stable and prevent wobbling. 4.
Installation To ensure years of enjoyment from your NADY AUDIO PSS150 Portable Sound System, please read and understand this manual thoroughly before using the unit. 1. INSPeCTION Your NADY AUDIO PSS-150 Portable Sound System was carefully packed at the factory in packaging designed to protect the units in shipment. Before installing and using your unit, carefully examine the packaging and all contents for any signs of physical damage that may have occurred in transit.
Front Panel Controls & Connections (1) (2) (3) (14) (4) (13) (5) (6) (15) (7) (8) (1) CHANNEL 1-3 COMBO XLR / 1/4’ INPUT The XLR mic inputs are an electronically balanced XLR type designed to accept mic level signals from any balanced or unbalanced low impedance (Low Z) microphone. The XLR jacks are configured for: Pin1 = ground, Pin2 = positive (+), Pin3 = negative (-). The XLR jacks have 15VDC phantom power applied to Pin2 and 3 for powering condenser microphones.
Front Panel Controls & Connections (1) (2) (3) (14) (4) (13) (5) (6) (15) (7) (8) (9) DSP EFFECTS DISPLAY This is displays the selected effect out of 16 possible effect presets. (10) DSP eFFeCTS SeLeCTOR The UP/DOWN buttons allow fast and easy scrolling in either direction through the 16 effect presets. effects List: 0. �oom �everb 1.5 sec 1. Hall �everb 2.8 sec 2. Large Hall 1.8 sec 3. Echo 7.0 sec 4. Large �oom 1.2 sec 6. Bright Hall 3.0 sec 7. Spring �everb 2.0 sec 8. Phaser 9. �ev/Flanger A.
Rear Panel Controls & Connections (18) (16) (17) (19) (16) FUSe HOLDeR & POWeR CORD CONNeCTOR This fuse holder contains an AC primary fuse. When this fuse blows, replace it with the same type fuse, size and power rating (see SPECIFICATIONS). If it continuously blows, stop replacing the fuse and refer servicing to qualified personnel. The cord connector is used to connect the AC power source to your power amplifier.
Service For Your NADY AUDIO Product (U.S.) Should your NADY AUDIO product require service, please contact the NADY Service Department via telephone at (510) 652-2411, or e-mail at service@nady.com. (International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product. Do not attempt to service this unit yourself as it can be dangerous and will also void the warranty. NADY SYSTeMS, INC.
