User Manual

USER GUIDE
PM-100
Personal Stage Monitor
Congratulations on purchasing the Nady Audio PM-100 personal stage
monitor. You have just purchased one of the finest personal stage
monitors on the market today. The PM-100 was developed using the
expertise of professional sound engineers and working musicians. You
will find your new Nady Audio stage monitor has superior performance
and greater flexibility than any other stage monitor in its price range.
Warnings
Features
• Designedtoreducestageclutterandvolumebyputtingthe
sound where you can most use it — the compact, rugged,
lightweight PM-100 can be mounted on a mic stand (with
built-in mic stand mount), used as an up-close monitor on a
keyboard, or as a stage monitor with four different angled
positions for optimum placement and versatility
• Speciallydesigneddualferro-uid5”driversoffer200W
peak power handling capacity, superior gain before
feedbackandupto125dBmaximumSPL
• Uniquelytunedresponseprojectsaudioatthedesired
frequenciestocutthroughstagenoisewhileensuring
high feedback immunity
• Volume/Impedanceselectorandtwo¼”In/Outjacks
for performer adjustability and easy daisy-chaining
withupto15otherPSM-100monitors
Specifications
Power Handling: 200WPeak(100WRMS)
Sensitivity: 96dB(1W@1M1KHz)
MAX SPL: 125dB
Frequency Response: 125Hz~19KHz
Weight: 5.1lbs.(2.3kg)
Dimensions (HWD): 11.1”x7”x5.3”(28cmx18cmx13.5cm)
Specifications subject to change at any time without prior
notice for purposes of product improvement
• Readallinstructionsbeforeusingtheproduct.
• Thisproductmaybecapableofproducingsoundlevelsthat
couldcausepermanenthearingloss.Donotoperatefora
long period of time at a high volume level or at a level that is
uncomfortable.Ifyouexperienceanyhearinglossorringing
in the ears, you should consult an audiologist.
• Toavoiddamagetothedrivers,neveroverloadthespeaker.
• Toavoidtheriskofre,donoteverexposethespeakerto
a source of naked flames. Also, it should be located away
from heat sources such as radiators, heat vents, or other
devices (including amplifiers) that produce heat.
• Theproductshouldbepositionedsothatproperventilation
is maintained.
• Thisspeakerisdesignedforindooruseonly.Donotexpose
to weather or high humidity, rain, etc.
• Careshouldbetakensothatobjectsdonotfallinto,and
liquidsarenotspilledthrough,theenclosure’sopenings.
Donotplacecontainersofliquidsonthespeaker.
• Theproductshouldbeconnectedtoapowersupplyonly
of the type described in the operating instructions or as
markedontheproduct.Replacethefuseonlywithone
ofthespeciedtype,size,andcorrectrating.
• Thepowersupplycordshould:(1)beundamaged,(2)never
share an outlet or extension cord with other devices so that
theoutlet’sorextensioncord’spowerratingisexceeded,
and(3)neverbeleftpluggedintotheoutletwhennotbeing
used for a long period of time.
• Don’tplaceanyheavyapplianceorobjectonthespeaker
enclosure.
• Thisproductshouldbeservicedbyqualiedservice
personnelif:
A.Objectshavefalleninto,orliquidhasbeenspilled
onto the product.
B.Theproducthasbeenexposedtorain.
C. The product does not appear to operate normally
or exhibits a marked change in performance.
D.Theproducthasbeendropped,ortheenclosure
damaged.
• Donotattempttoservicethisunit.Allservicingshouldbe
referredtoqualiedservicepersonnel.