manual

E9
10 CDX2 Introduction and Installation
The CDX2 CD Player can be operated either from its internal power supply or, for
improved performance, from an external Naim CD 555PS or XPS Power Supply.
Connection of the XPS Power Supply is illustrated in Diagram 11.2. CD player control and
operation is described in Sections 19, 20 and 21.
The CDX2 should be installed on a dedicated equipment stand intended for the purpose.
To improve sound quality the player has hard metallic feet which may blemish any
delicate surface on which it is placed. Do not stand the player directly on top of another
item of Naim Audio equipment. Care should be taken to ensure that the player is level.
The CDX2 is fitted with both analogue and S/PDIF digital output options selectable using a
rear panel switch.
A transit screw on the underside of the CDX2 should be removed before use and must
be replaced if the unit is to be moved or re-packed and shipped. The transit screw must
not be used in any other Naim product. Do not invert the player once the transit screw is
removed.
The player (and external power supply if used) should be installed in its final location
before connecting cables or switching on. Ensure that power amplifiers are switched off
and the preamplifier volume is turned down before the player (or external power supply)
is switched on. The player power button is located on the rear panel. Power supply power
buttons are located on their front panels.
The player and power supply are heavy and care should be taken when lifting or moving
them. Make sure that the surface on which they are to be placed can support their
weight.
CDX2
Note: RCA phono and DIN output sockets should not be
connected simultaneously.
Note: The power supply link plug should be fitted unless an
external upgrade power supply is in use.
Note: The Remote Input is intended to accept external
control signals for multi-room applications. Contact your
dealer or Naim Audio directly for further information.
Note: The optional RS232 Interface can provide external
control of the player in custom installations. Contact your
dealer or Naim Audio directly for further information.
11 CDX2 Connections
11.1 Rear Panel
ch1
-ve
nc
nc
ch2
CDX2
DIN Output
RCA
phono
output
left
RCA
phono
output
right
Mains
input and
fuse
Power
switch
Upgrade power
supply input
(link plug tted)
DIN output
S/PDIF digital
out
Digital/analogue
output switch
Remote input
RS232 interface