Operation Manual

8
2. Network Connection
Diagram 8
Setup web page - Network
2.2 Wired Network Connection
To connect Mu-so to a local network using a wired
connection follow the steps below:
• Disconnect Mu-so from mains power.
• Connect Mu-so to your local network router using a
standard Ethernet cable.
After a few moments Mu-so should be available for
streaming on your home network. The Mu-so status
indicator will illuminate white.
Note: Mu-so can be congured to use a static IP address
if required via the Advanced Settings tab on its setup
page. Diagram 8 illustrates the setup page.