Owner's Manual
Table Of Contents
- Reference Manual
- Introduction
- 1. Getting Started
- 2. Network Connection
- 3. Bluetooth Connection
- 4. Music Sources
- 5. Control
- 5.1 The Touch Panel and Rotary Control
- Diagram 10 Touch Panel and Rotary Control
- Diagram 11 Touch Standby to switch on and off Turn the rotary control to adjust volume
- Diagram 12 Bluetooth stream playing
- Diagram 13 UPnP™ stream playing
- Diagram 14 AirPlay stream playing
- Diagram 15 Spotify® Connect stream playing
- Diagram 16 TIDAL stream playing
- Diagram 17 iRadio input
- Diagram 18 Local inputs
- 5.2 The Mu-so Remote Control Handset
- 5.3 The Naim App
- 5.1 The Touch Panel and Rotary Control
- 6. Installation Notes
- 7. Specifications
- 8. Acknowledgements
- Quick Start Guide
- Safety Manual
8
2. Network Connection
Diagram 8
Setup web page - Network
2.2 Wired Network Connection
To connect Mu-so to a local network using a wired
connection follow the steps below:
• Disconnect Mu-so from mains power.
• Connect Mu-so to your local network router using a
standard Ethernet cable.
After a few moments Mu-so should be available for
streaming on your home network. The Mu-so status
indicator will illuminate white.
Note: Mu-so can be congured to use a static IP address
if required via the Advanced Settings tab on its setup
page. Diagram 8 illustrates the setup page.