Owner's Manual
Table Of Contents
- Reference Manual
- Introduction
- 1. Getting Started
- 2. Network Connection
- 3. Bluetooth Connection
- 4. Music Sources
- 5. Control
- 5.1 The Touch Panel and Rotary Control
- Diagram 10 Touch Panel and Rotary Control
- Diagram 11 Touch Standby to switch on and off Turn the rotary control to adjust volume
- Diagram 12 Bluetooth stream playing
- Diagram 13 UPnP™ stream playing
- Diagram 14 AirPlay stream playing
- Diagram 15 Spotify® Connect stream playing
- Diagram 16 TIDAL stream playing
- Diagram 17 iRadio input
- Diagram 18 Local inputs
- 5.2 The Mu-so Remote Control Handset
- 5.3 The Naim App
- 5.1 The Touch Panel and Rotary Control
- 6. Installation Notes
- 7. Specifications
- 8. Acknowledgements
- Quick Start Guide
- Safety Manual
4
Playing music
Other ways to listen to your music
(1) Connect your to your wi- network. (2) Open up the Spotify app on
your phone, tablet or laptop using the same wi- network. (3) Play a song and
select Devices Available. (4) Select your and start listening.
AirPlay is an Apple technology designed to control home audio systems and
speakers in any room from your iPhone, iPad, HomePod or Apple TV.
To setup AirPlay 2 use the Home app on an iOS device running software 11.4 or
later. Open the Home app and tap the (+) button to add it as an Accessory. You
can also enable AirPlay from macOS via the 's webpage by navigating
to its IP address in your browser.
Stream your favourite music from your phone, tablet or laptop to your
. To use Chromecast built-in to cast audio to your ,
you must rst congure it using the Google Home app. You can set up
Chromecast groups with other products in the Devices screen.
Use the Naim App to set up and control your . Look for
‘Naim’ on the Apple App Store or Google Play Store to download
and install. Launch the app and follow the setup instructions to
congure your and learn about its features.