Owner's Manual
Table Of Contents
- Reference Manual
- Introduction
- 1. Getting Started
- 2. Network Connection
- 3. Bluetooth Connection
- 4. Music Sources
- 5. Control
- 5.1 The Touch Panel and Rotary Control
- Diagram 10 Touch Panel and Rotary Control
- Diagram 11 Touch Standby to switch on and off Turn the rotary control to adjust volume
- Diagram 12 Bluetooth stream playing
- Diagram 13 UPnP™ stream playing
- Diagram 14 AirPlay stream playing
- Diagram 15 Spotify® Connect stream playing
- Diagram 16 TIDAL stream playing
- Diagram 17 iRadio input
- Diagram 18 Local inputs
- 5.2 The Mu-so Remote Control Handset
- 5.3 The Naim App
- 5.1 The Touch Panel and Rotary Control
- 6. Installation Notes
- 7. Specifications
- 8. Acknowledgements
- Quick Start Guide
- Safety Manual
4
1. Getting Started
Diagram 3 – Mu-so Qb
Mu-so Qb connection panel
Network socket
Pin-hole button
Status indicator
USB audio input socket
Analogue audio input socket
Digital audio
input socket
Mains power socket
1.2 Switch On and Standby
Mu-so and Mu-so Qb will immediately switch-on when
connected to a mains supply.
There are two standby modes: standby and deep sleep. In
standby mode network and Bluetooth connections remain
operational to enable Mu-so and Mu-so Qb to “wake”
automatically when in receipt of a Naim App control
command or a music stream. In deep sleep mode network
and Bluetooth functions will shut-down in order to reduce
power consumption to a minimum.
• To switch Mu-so or Mu-so Qb into standby mode tap
the touch panel Standby icon. Tap the Standby icon to
leave standby mode.
• To switch Mu-so or Mu-so Qb into deep sleep mode
touch and hold the touch panel Standby icon, or press
and hold the Mu-so handset Standby button. The
display segment above the Standby icon will ash as
deep sleep mode is engaged. Touch the Standby icon
or handset button again to wake from deep sleep.
Note: If unused for 20 minutes Mu-so and Mu-so Qb
automatically enter standby mode. The auto standby time
can be adjusted via the Naim App Settings menus.