User Guide

ManualsBrandsNaim ManualsOtherN-VI

E12

Note:

Midnight Mode is not available with analogue material.

Note:

Midnight Mode can also be selected directly during normal

operation from the remote handset.

7.5.6 Input Labels

Input Labels

enables a descriptive label to be assigned to each

numbered n-Vi input socket. Inputs can also be disabled (set

to OFF) from this menu. The n-Vi’s internal “inputs” - Disc, DAB

and FM cannot be assigned alternative names.

Note:

It is not necessary to assign labels to the inputs but doing

so helps make n-Vi operation more intuitive.

Note:

Two labels can be assigned to Analogue Input 3, one for

its rear panel socket and one for its front panel socket. The front

panel input will only be available for selection when a connector is

plugged-in.

7.6 Speaker Setup

Selection of

Speaker Setup

from the top level menu generates

a second level menu described and illustrated below.

7.6.1 Speaker Size

Selection of

Speaker Size

Selection of Speaker Size Selection of

enables the size of each speaker

to be defined. Generally a “small” speaker is an element of a

satellite/subwoofer package, while a “large” speaker is a full-

range type. The “small” left/right option is unavailable if no

subwoofer is present.

Note:

Ext (External) Large or Small should be selected if the front

speakers are connected to the n-Vi via an external power amplifier.

7.6.2 Units

Selection of

Units

Selection of Units Selection of

enables the preferred distance measurement

units (feet or metres) for the Speaker Distance menu to be set.

n-Vi

On Screen Setup

7.5 Audio Setup

Selection of

Audio Setup

from the top level menu generates a

second level menu described and illustrated below.

7.5.1 Digital Audio Output

Selects the player’s

Digital Audio Output

format from

Multi-

channel

(i.e Dolby Digital, DTS, etc.) or

Stereo

(PCM stereo)

options.

Note:

The n-Vi must be in stop mode to select audio outputs.

7.5.2 Bass Mix

Selection of

Bass Mix

routes the front left and right speaker

low frequency signals additionally to the subwoofer channel.

Note:

Bass Mix will have no effect when a low frequency effects

(LFE) channel is encoded in the programme material.

Note:

Bass Mix is not available on analogue source material.

7.5.3 Pro Logic II

Selection of

Pro Logic II

Options provides adjustment of the

Panorama

Centre Width

and

Dimension

parameters.

Panorama

“ON” diverts a proportion of the front stereo signal

to the surround channels.

Centre Width

adjustment varies the relative strength of the

centre and front channels, a higher value increasing the

strength of the front channels.

Dimension

adjustment varies the relative strength of the

surround and front signals, a higher value increasing the

strength of the surround channels.

Note:

Pro Logic II Options are only effective when Dolby* Pro Logic

II Music Mode is selected.

7.5.4 Neo:6 Centre Gain

Selection of

Neo:6 Centre Gain

provides independent

adjustment of the centre channel volume level.

Note:

Neo:6 Centre Gain is only effective when DTS Neo:6 Music

Mode is selected.

7.5.5 Midnight Mode

Selection of

Midnight Mode

compresses the audio signal and

reduces its bass content to reduce the disturbance of late-night

listening.

7.5.6 Input Labels

7.5.1 Digital Audio Output

DVD playback

system setup

video setup

prog. scan setup

audio setup

speaker setup

parental control

exit menu

digital audio output

bass mix

Pro Logic II

Neo:6 centre gain

midnight mode

input labels

multi-channel

up/down to select

ok to confirm

left or return to go

back with no change

menu for help

Selection of

Speaker Size

Selection of Speaker Size Selection of

enables the size of each speaker

DVD playback

system setup

video setup

prog. scan setup

audio setup

speaker setup

parental control

exit menu

speaker size

units

speaker distance

test signal

speaker level

front: large

left/right to select

speakers

up/down to select size

ok to confirm

return to go back with

no change

menu for help

Input Labels

enables a descriptive label to be assigned to each

DVD playback

system setup

video setup

prog. scan setup

audio setup

speaker setup

parental control

exit menu

digital audio output

bass mix

Pro Logic II

Neo:6 centre gain

midnight mode

input labels

A1 : Analogue 1

left/right to select input

up/down to select label

ok to confirm

left or return to go

back with no change

menu for help