Specifications

E11
NaimUniti Setup
Select the Large+Suboptionwhenasubwooferis
connected to NaimUniti and used to augment the low
frequencyperformanceoflarge(fullbandwidth)speakers.
Select Largewhennosubwooferisused(theNaimUniti
subwooferoutputisswitchedoffwhenLargeisselected).
Select Small+Subwhenasubwooferisusedtoprovide
thelowfrequencycomponentofaspeakersystem
incorporatingsmall(restrictedbandwidth)satellite
speakers.WhenSmall+Subisspecified,a100Hzhigh-pass
filter is applied to the NaimUniti speaker output signal.
The speaker Max. Volume and Balance parameters specify
maximumallowedvolume,andthechannelbalance
respectively.
4.5 The Headphones Menu
The Headphones setup menu
enablestheMax. Volume
parameter tobespecified:
Parameter Options
Max. Volume: 0to100(adjust
using handset 6
or 5keys)
4.6 The Network Settings Menu
The Network Settings menu
enablesNaimUnitinetwork
parameterstobecustomised
to suit the router and network.
Theoptionsaretabulated
anddescribedinthefollowing
sections:
Parameter Options
Name: Userdefinable(textentry)
Default: Uniti-xxxx
Wireless: None / Wireless Network Names
Status: EthernetOK/NoNetwork/Connecting/
OK.Signalxxx%(valuereflectssignallevel)
DHCP: Yes / No
The NameparameterenablestheNaimUniti’sdefault
networknametobechanged.
The Wirelessparameterenablesawirelessnetworktobe
chosenandjoined.SeeSection4.6.1belowfordetailed
wireless set up notes.
Network Status displays the current network connection
status.
The DHCPparameterenablestheNaimUnitinetwork
settingstobemodified.Inmostcases,specifyingYes and
leavingNaimUnitisettoDHCP,willbetheappropriate
option.SeeSection4.6.2belowfornotesonnon-DHCP
network connection.
Note: Devices installed on a network have an IP address
through which they are identified by all the other items
on the network. DHCP is a set of rules that enable the
automatic allocation of addresses as items are connected
(or switched on while connected) to the network.
NaimUniti is set up by default to use DHCP.
Note: If NaimUniti is connected to the network both
wirelessly and via ethernet (wired), the ethernet
connection will take priority.
4.6.1 Wireless Network
Connection Set Up
If the Wireless parameter is
selected in the Network Settings
menu the Select Network menu
willdisplayalistoftheavailable
networks. An option not to use a wireless connection is
also provided. Use the handset up(5)ordown(6)keys
to scroll through the list and the ok/list key to select a
network.
Note: NaimUniti is compatible with most commonly used
WiFi standards. Routers that support 802.11b and 802.11g
will work, however those with 802.11g compatibility are
recommended for best results.
Note: NaimUniti cannot connect to a “hidden” wireless
network.
If the selected network is secure
andrequiresapassphraseor
access key to join, NaimUniti will
display an alert message. Pressing
the handset ok/list key will then
open a text entry screen for entry
of the passphrase or access key.
Use the handset numeric/text
keys to enter the passphrase or
access key taking care to ensure
that the letter case is correct.
Press the handset ok/list key
when text entry is complete. In
the illustration the passphrase is
“flatfish”.
If the network is successfully
joined NaimUniti will display a
confirmation screen.
If an incorrect passphrase or
access key is entered NaimUniti
will display an alert message.
Note: As a security measure,
a router may also require the
NaimUniti’s MAC address to be entered before allowing
it to join the wireless network. This type of security feature
is known as ‘MAC address filtering’. The NaimUniti MAC
address is shown in the ‘Factory settings > System Status’
page.
Network Settings 1/4
4Name: Uniti-0131
Wireless: None
Status: Connecting
DHCP Yes
Headphones 1/1
4Max. Volume: 100
Select Network 3/6
<Don’t Use Wireless>
LingNet
4GreenNet
 TomNet
Now enter your wireless
passphrase or access key.
Press OK to continue
flatfish abc
f l a t f i s h _
Press OK to confirm
Connected
Press OK To Finish
Can’t Login
Press OK To Re-Try